Réparez vos affaires Communauté Boutique

Ninja Coffee Bar CF080 Heated Plate Replacement

Introduction

This guide will show how to remove the heated plate from the coffee machine.

Ce dont vous avez besoin

  1. Ninja Coffee Bar CF080 Heated Plate Replacement, Heated Plate: étape 1, image 1 de 1

    • Face the machine bottom towards you.

    Modifier

  2. Ninja Coffee Bar CF080 Heated Plate Replacement: étape 2, image 1 de 2 Ninja Coffee Bar CF080 Heated Plate Replacement: étape 2, image 2 de 2

    • Unscrew six 0.6cm screws by holding the bottom board with Torx #10 screwdriver to remove the board.

    • Unscrew one 0.6 cm screw with PH1 screwdriver to remove the board.

    Modifier

  3. Ninja Coffee Bar CF080 Heated Plate Replacement: étape 3, image 1 de 3 Ninja Coffee Bar CF080 Heated Plate Replacement: étape 3, image 2 de 3 Ninja Coffee Bar CF080 Heated Plate Replacement: étape 3, image 3 de 3

    • With moderate force remove and place the "plastic opening tool" between the divide in order to remove the bottom board.

    Modifier

  5. Ninja Coffee Bar CF080 Heated Plate Replacement: étape 4, image 1 de 3 Ninja Coffee Bar CF080 Heated Plate Replacement: étape 4, image 2 de 3 Ninja Coffee Bar CF080 Heated Plate Replacement: étape 4, image 3 de 3

    • Remove the bottom board with moderate force.

    Modifier

  6. Ninja Coffee Bar CF080 Heated Plate Replacement: étape 5, image 1 de 1

    • Unscrew eight 0.6cm sized screws with Phillips #1 screwdriver, holding the silver secures on the sides of the heated plate.

    • Four screws on each side, two silver secures to remove the securers, located on the sliver bar holding the heated plate (one on each end).

    Modifier

  7. Ninja Coffee Bar CF080 Heated Plate Replacement: étape 6, image 1 de 1

    • Unscrew two 0.6cm sized screws Phillips #1 screwdriver.

    • The silver bar will fall off once screws are removed.

    Modifier

  8. Ninja Coffee Bar CF080 Heated Plate Replacement: étape 7, image 1 de 2 Ninja Coffee Bar CF080 Heated Plate Replacement: étape 7, image 2 de 2

    • Remove the heated plate from the machine with easy glide.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 6 autres contributeurs

Elizabeth Nguyen

Membre depuis le 09/11/17

416 Réputation

3 tutoriels rédigés

Badges: 7

+ 4 badges supplémentaires

Équipe

CSU Fullerton, Team S1-G1, Bruce Fall 2017 Membre de l'équipe CSU Fullerton, Team S1-G1, Bruce Fall 2017

CSUF-BRUCE-F17S1G1

4 membres

5 tutoriels rédigés

Un commentaire

Where do you get a replacement plate at?

Timothy Sick - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 6

Total : 790