Aller au contenu principal

Ninja Coffee Bar CF086 Water Heating Element Replacement

Ce dont vous avez besoin

  1. Ninja Coffee Bar CF086 Water Heating Element Replacement, Water Heating Element: étape 1, image 1 de 2 Ninja Coffee Bar CF086 Water Heating Element Replacement, Water Heating Element: étape 1, image 2 de 2
    • Make sure the Ninja Coffee Bar is unplugged and that you have a dry, clean workspace for this task.

    • Remove the carafe and water reservoir and set them aside.

  2. Ninja Coffee Bar CF086 Water Heating Element Replacement: étape 2, image 1 de 1
    • Unscrew the T-10 screws from the bottom cover of the machine, and remove that bottom cover.

  3. Ninja Coffee Bar CF086 Water Heating Element Replacement: étape 3, image 1 de 1
    • Unscrew and remove the heating plate layer. This will expose the internal workings of the machine.

  4. Ninja Coffee Bar CF086 Water Heating Element Replacement: étape 4, image 1 de 1
    • Locate the water heating element in the interior of your coffee maker.

    • Unscrew the two indicated J1S1 screws at the base of the water heating element.

  5. Ninja Coffee Bar CF086 Water Heating Element Replacement: étape 5, image 1 de 1
    • Unscrew and remove the remaining J1S1 screws that secure the water heating element to the interior of the device.

  6. Ninja Coffee Bar CF086 Water Heating Element Replacement: étape 6, image 1 de 3 Ninja Coffee Bar CF086 Water Heating Element Replacement: étape 6, image 2 de 3 Ninja Coffee Bar CF086 Water Heating Element Replacement: étape 6, image 3 de 3
    • Grasp and remove the clamp securing the tube that feeds into the base of the water heating element.

    • Detach the tube from the water heating element.

  7. Ninja Coffee Bar CF086 Water Heating Element Replacement: étape 7, image 1 de 2 Ninja Coffee Bar CF086 Water Heating Element Replacement: étape 7, image 2 de 2
    • Locate the coated wire that feeds into the side of the water heating element. Remove this wire.

  8. Ninja Coffee Bar CF086 Water Heating Element Replacement: étape 8, image 1 de 2 Ninja Coffee Bar CF086 Water Heating Element Replacement: étape 8, image 2 de 2
    • Locate the two wires leading out from the water heating element that feed into crimp connectors.

    • Using side cutters, sever these wires near the crimp connectors.

    • Use the side cutters to cut the remaining wires that feed into the crimp connectors from the coffee machine.

  9. Ninja Coffee Bar CF086 Water Heating Element Replacement: étape 9, image 1 de 2 Ninja Coffee Bar CF086 Water Heating Element Replacement: étape 9, image 2 de 2
    • Squeeze and remove the clamp that secures the main tube feeding into the water heating element. Remove that tube.

    • Remove the water heating element.

  10. Ninja Coffee Bar CF086 Water Heating Element Replacement: étape 10, image 1 de 3 Ninja Coffee Bar CF086 Water Heating Element Replacement: étape 10, image 2 de 3 Ninja Coffee Bar CF086 Water Heating Element Replacement: étape 10, image 3 de 3
    • Using wire strippers, strip the cut wires from your coffee machine near their cut ends to expose 2 cm of metal conductor from each.

    • Use a similar procedure to strip the wires from your replacement heating element. Using wire strippers, expose 2 cm of metal conductor from the ends of the wires.

  11. Ninja Coffee Bar CF086 Water Heating Element Replacement: étape 11, image 1 de 1
    • Prepare two crimp connectors by filling them with dielectric grease.

    • Use a crimp connector to connect a stripped end of the wire leading from the replacement heating element to the stripped end of the corresponding wire from the coffee maker.

    • Using a second crimp connector, repeat for the remaining pair of stripped wires.

    • Using the appropriate crimping tool, crimp the connectors.

Conclusion

To finish reassembling your device, follow steps 2-7 in reverse order.

2 autres ont terminé cette réparation.

David Ton

Membre depuis le 10/02/17

630 Réputation

5 tutoriels rédigés

Équipe

USF Tampa, Team S1-G5, Thompson Fall 2017 Membre de l'équipe USF Tampa, Team S1-G5, Thompson Fall 2017

USFT-THOMPSON-F17S1G5

4 membres

5 tutoriels rédigés

2 commentaires

Where is the heating element available for sale.

ausbinp - Réponse

I need a element for a CM401 model, any help?. gene@wholedamarea.com

Lester Bouler - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 8

30 derniers jours : 49

Total : 4,216