Introduction
In the Ninja Foodi SP101, the cooling fan is a key part to ensure the unit returns to room temperature after use. Before starting this guide, ensure that the Foodi is disconnected from power and completely cool.
Ce dont vous avez besoin
-
-
Use a TR10 screwdriver to remove the four 11mm screws holding the black lever bar in place.
-
-
-
Use a Phillips #1 screwdriver to remove the three 8mm screws on each side of the back panel.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.