Introduction
On the Ninja Foodi SP101, the side panels are important for ventilation and protection of the unit. Underneath the side panels are all the electronics and heating units, so removal of the panels are essential for any repair.
Ce dont vous avez besoin
-
-
Use a TR10 screwdriver to remove the four 11mm screws holding the black lever bar in place.
-
-
-
-
Use a Phillips #1 screwdriver to remove the three 8mm screws on each side of the back panel.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.