Aller au contenu principal

Nintendo 3DS Circle Pad Joystick Replacement

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Ce dont vous avez besoin

  1. Nintendo 3DS Circle Pad Joystick Replacement, Circle Pad Joystick: étape 1, image 1 de 1
    • Remove the two 7.7 mm Phillips screws securing the back of the Circle Pad to the motherboard.

  2. Nintendo 3DS Circle Pad Joystick Replacement: étape 2, image 1 de 3 Nintendo 3DS Circle Pad Joystick Replacement: étape 2, image 2 de 3 Nintendo 3DS Circle Pad Joystick Replacement: étape 2, image 3 de 3
    • Use the flat end of a spudger to pry the back of the Circle Pad off the motherboard.

    • Lift the Circle Pad joystick off the motherboard and lay it on its back so that the ribbon cable connector is accessible.

  3. Nintendo 3DS Circle Pad Joystick Replacement: étape 3, image 1 de 3 Nintendo 3DS Circle Pad Joystick Replacement: étape 3, image 2 de 3 Nintendo 3DS Circle Pad Joystick Replacement: étape 3, image 3 de 3
    • Use the flat end of a spudger or your fingernail to flip up the retaining flap on the Circle Pad ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, not the socket itself.

    • Lift the Circle Pad joystick off the motherboard.

  4. Nintendo 3DS Circle Pad Joystick Replacement: étape 4, image 1 de 2 Nintendo 3DS Circle Pad Joystick Replacement: étape 4, image 2 de 2
    • To decrease the chance of losing it during repairs, you may want to remove the two thin pads underneath the Circle Pad joystick.

    • Use a spudger or screwdriver to lift the pads up and remove them from the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

David Hodson

Membre depuis le 04/13/10

150 493 Réputation

127 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 361