Nintendo 64 Rumble Pak Battery Replacement - Tutoriel de réparation iFixit

Introduction

Does your Rumble Pak no longer vibrate? Learn how to check for corrosion and replace the batteries in your Rumble Pak to continue enjoying the ultimate gaming experience.

Ce dont vous avez besoin

Étape 1 Rumble Pak Battery

Nintendo 64 Rumble Pak Battery Replacement, Rumble Pak Battery: étape 1, image 1 de 1

Remove the Rumble Pak from the controller by pressing the release button and pulling the Rumble Pak out.

Étape 2

Nintendo 64 Rumble Pak Battery Replacement: étape 2, image 1 de 1

Remove the battery cover from the Rumble Pak by pressing the tab and pulling the cover up.

Étape 3

Nintendo 64 Rumble Pak Battery Replacement: étape 3, image 1 de 1

Press each battery toward the spring, then pull toward you to remove the batteries from the Rumble Pak.
When inserting the new batteries, make sure the positive (+) end of the battery touches the flat piece, and the negative (-) end touches the spring.

Étape 4

Nintendo 64 Rumble Pak Battery Replacement: étape 4, image 1 de 3

Nintendo 64 Rumble Pak Battery Replacement: étape 4, image 2 de 3

Nintendo 64 Rumble Pak Battery Replacement: étape 4, image 3 de 3

Check for corrosion around the springs and the flat plate where the batteries touch.
Do not touch the corrosion. It may be battery acid.
Use a flat head screwdriver to chisel away the corrosion, and use a Q-tip to wipe it clean.
Do not use water to wet the Q-tip, as water can damage the Rumble Pak.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 2 autres contributeurs

Carly Bowen

Membre depuis le 07/20/15

304 Réputation

1 tutoriel rédigé

+ 2 badges supplémentaires

Équipe

Texas Tech, Team 3-6, Rauch SU 2015 Membre de l'équipe Texas Tech, Team 3-6, Rauch SU 2015

TTU-RAUCH-SU15S3G6

3 membres

2 tutoriels rédigés

0 commentaires

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 6

30 derniers jours : 31

Total : 4,014