Réparez vos affaires Communauté Boutique

Nintendo 64 Bottom Cover Disassembly

Introduction

This is how you remove the bottom cover

Ce dont vous avez besoin

  1. Nintendo 64 Bottom Cover Disassembly, Top Cover: étape 1, image 1 de 1

    • Remove the expansion pack cover by pushing in the tab and pulling out.

    Modifier

  2. Nintendo 64 Bottom Cover Disassembly: étape 2, image 1 de 1

    • If your system uses a jumper pack, the same procedure applies to remove it.

    • A small spoon can be used in place of a spudger.

    • Lever the expansion pack out using a metal spudger.

    Modifier

  3. Nintendo 64 Bottom Cover Disassembly: étape 3, image 1 de 1

    • Remove the six screws on the bottom side indicated in the example with a gamebit head or screwdriver.

    Modifier

  4. Nintendo 64 Bottom Cover Disassembly: étape 4, image 1 de 1

    • Remove the two front feet of the N64.

    Modifier

  5. Nintendo 64 Bottom Cover Disassembly: étape 5, image 1 de 1

    • Rotate to top side up and lift off top cover.

    Modifier

  6. Nintendo 64 Bottom Cover Disassembly, Metal Plate: étape 6, image 1 de 2 Nintendo 64 Bottom Cover Disassembly, Metal Plate: étape 6, image 2 de 2

    • Remove the fourteen screws indicated in the example using the larger Phillips screwdriver.

    Modifier

  8. Nintendo 64 Bottom Cover Disassembly: étape 7, image 1 de 2 Nintendo 64 Bottom Cover Disassembly: étape 7, image 2 de 2

    • Remove the metal plate indicated in the example by sliding it back and then lifting it up.

    Modifier

  9. Nintendo 64 Bottom Cover Disassembly: étape 8, image 1 de 1

    • Remove the two screws indicated in the example using the smaller Phillips screwdriver.

    Modifier

  10. Nintendo 64 Bottom Cover Disassembly: étape 9, image 1 de 1

    • Remove the screw to the right of the LED light using the larger Phillips screwdriver.

    Modifier

  11. Nintendo 64 Bottom Cover Disassembly: étape 10, image 1 de 1

    • Remove the small metal bracket from the back of the expansion pack slot.

    Modifier

  12. Nintendo 64 Bottom Cover Disassembly: étape 11, image 1 de 2 Nintendo 64 Bottom Cover Disassembly: étape 11, image 2 de 2

    • Remove the small metal bracket from the front of the expansion pack slot with the metal spudger.

    Modifier

  13. Nintendo 64 Bottom Cover Disassembly: étape 12, image 1 de 2 Nintendo 64 Bottom Cover Disassembly: étape 12, image 2 de 2

    • Remove the small metal bracket behind the expansion slot using the spudger.

    Modifier

  14. Nintendo 64 Bottom Cover Disassembly: étape 13, image 1 de 2 Nintendo 64 Bottom Cover Disassembly: étape 13, image 2 de 2

    • Remove the seven screws indicated in the example using the larger Phillips screwdriver.

    Modifier

  15. Nintendo 64 Bottom Cover Disassembly: étape 14, image 1 de 1

    • Lift off and remove the metal plate as indicated in the example.

    Modifier

  16. Nintendo 64 Bottom Cover Disassembly, Motherboard: étape 15, image 1 de 1

    • Remove the four screws indicated using the #1 Phillips screwdriver.

    Modifier

  17. Nintendo 64 Bottom Cover Disassembly, Motherboard removal: étape 16, image 1 de 1

    • Lift up and remove the motherboard.

    Modifier

  18. Nintendo 64 Bottom Cover Disassembly, Nintendo 64 Bottom Cover Disassembly: étape 17, image 1 de 1

    • Remove everything from the bottom cover.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

23 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

tonymag28

Membre depuis le 10/28/09

2 154 Réputation

3 tutoriels rédigés

Badges: 14

+ 11 badges supplémentaires

Équipe

Cal Poly, Team 5-4, Regan Fall 2009 Membre de l'équipe Cal Poly, Team 5-4, Regan Fall 2009

CPSU-REGAN-F09S5G4

7 membres

15 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 3

7 derniers jours : 38

30 derniers jours : 184

Total : 40,190