Aller au contenu principal

Introduction

Prerequisite guide of Nintendo DS Lite lower LCD assembly.

Outils

Pièces

Aucune pièce spécifiée.

  1. Use your fingernail or the edge of a plastic opening tool to carefully flip up the lower LCD ribbon cable retaining flap. Make sure you are flipping up the retaining flap, not the socket itself.
    • Use your fingernail or the edge of a plastic opening tool to carefully flip up the lower LCD ribbon cable retaining flap.

    • Make sure you are flipping up the retaining flap, not the socket itself.

    • Pull the lower LCD assembly straight away to separate the lower LCD ribbon cable from its socket on the motherboard.

    • Remove the lower LCD assembly from the motherboard.

    • When reinstalling lower LCD, ensure it has insulation on the back to prevent a short circuit with the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Matthew Newsom

Membre depuis le 05/01/2010

37 048 Réputation

67 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 514