Aller au contenu principal

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Nintendo DSi Top LCD Screen Replacement

Tutoriel Archivé
Ce tutoriel est conservé uniquement à des fins de suivis historiques. Utilisez la version actuelle du tutoriel pour effectuer votre réparation.

Ce dont vous avez besoin

  1. Attention : les étapes 1 à 2 sont issues d'un tutoriel marqué comme en cours.

    Nintendo DSi Top LCD Screen Replacement, Battery: étape 1, image 1 de 1
    • Loosen the two screws on the battery panel. Then lift the panel up to remove it.

  2. Nintendo DSi Top LCD Screen Replacement: étape 2, image 1 de 1
    • L Button.

    • Top of the battery pack.

    • To remove the battery pack, place your fingernail or a spudger at the top of the battery near the L button. Gently lift the battery out.

  3. Attention : les étapes 3 à 4 sont issues d'un tutoriel marqué comme en cours.

    Nintendo DSi Top LCD Screen Replacement, Motherboard: étape 3, image 1 de 2 Nintendo DSi Top LCD Screen Replacement, Motherboard: étape 3, image 2 de 2
    • Remove 4 Phillips screws from the board.

    • Lift the main board from the bottom end and flip it over to reveal the last connector.

    • Keep the main board fairly close to the case, making sure not to damage the last ribbon cable holding it in place.

  4. Nintendo DSi Top LCD Screen Replacement: étape 4, image 1 de 1
    • Disconnect the ribbon cable by gently using a plastic opening tool to flip up the black connector latch. The cable should easily slide out from the connector.

    • The motherboard should now be free from the rest of the device.

  5. Attention : les étapes 5 à 7 sont issues d'un tutoriel marqué comme en cours.

    Nintendo DSi Top LCD Screen Replacement, Disassembling Nintendo DSi Bottom case: étape 5, image 1 de 1
    • Remove the rubber front-panel button membranes from the device. Pay careful attention to where the buttons go, so you can replace them correctly.

    • A/B/X/Y button assembly

    • Select/Start button assembly

    • D-pad

    • Power button

  6. Nintendo DSi Top LCD Screen Replacement: étape 6, image 1 de 2 Nintendo DSi Top LCD Screen Replacement: étape 6, image 2 de 2
    • Remove the plastic buttons and keep them in a safe place.

    • All of the buttons have "key" notches to prevent them from being inserted incorrectly (backwards or in the wrong place), but it can take a while to figure out where everything goes if they get shuffled around.

  7. Nintendo DSi Top LCD Screen Replacement: étape 7, image 1 de 2 Nintendo DSi Top LCD Screen Replacement: étape 7, image 2 de 2
    • Flip the case open, and push the lower screen assembly out of the frame.

  8. Nintendo DSi Top LCD Screen Replacement, Top LCD Screen: étape 8, image 1 de 1
    • To make the repair easier, we recommend removing the bottom LCD screen prior to replacing the top LCD screen.

    • Using a spudger, or similar tool, pry out the 4 square screw covers.

  9. Nintendo DSi Top LCD Screen Replacement: étape 9, image 1 de 1
    • Remove 4 Phillips screws with a #00 Phillips screwdriver.

  10. Nintendo DSi Top LCD Screen Replacement: étape 10, image 1 de 1
    • Place a plastic opening tool between the front panel and top edge of the outer case. Slide the tool along the edge as needed to prop open the case.

    • With the screen facing you, slide the screen side down with your thumbs to separate the screen from the cover.

  11. Nintendo DSi Top LCD Screen Replacement: étape 11, image 1 de 1
    • Remove the antenna from the bottom left of the device.

    • Remove the microphone from the top of the frame.

  12. Nintendo DSi Top LCD Screen Replacement: étape 12, image 1 de 1
    • Use a spudger to pry the camera out of its place.

  13. Nintendo DSi Top LCD Screen Replacement: étape 13, image 1 de 1
    • Cables for the components in the upper half of the device run through the hinge, which must be carefully disassembled before continuing.

    • Start by pushing the sliding shaft in the hinge on the opposite side of the wires/ribbons.

  14. Nintendo DSi Top LCD Screen Replacement: étape 14, image 1 de 1
    • On the reverse side of the casing, insert the spudger onto the surface of the sliding shaft just left of the LED light channels.

    • Push the sliding shaft completely through the hinge until it stops and the hinge is released.

  15. Nintendo DSi Top LCD Screen Replacement: étape 15, image 1 de 1
    • The right side of bottom case should separate from the top case when you remove the sliding shaft.

    • Do not pull up too far or the wire hinge may be damaged.

    • Slide the top case to the right to separate the joint.

    • Weave the wires and ribbons through the wire hinge to completely separate the top and bottom casings.

  16. Nintendo DSi Top LCD Screen Replacement: étape 16, image 1 de 2 Nintendo DSi Top LCD Screen Replacement: étape 16, image 2 de 2
    • The speakers are soldered to the ribbon cable attached to the upper LCD, so they must be removed at the same time as the LCD.

    • Lift the top LCD out of the plastic frame. Carefully thread the ribbon cable out of the hinge to avoid damaging it.

  17. Nintendo DSi Top LCD Screen Replacement: étape 17, image 1 de 1
    • To remove the speakers, place a flat object underneath and gently pry them off.

Conclusion

To reassemble your device, follow these instructions in reverse order.

rjcamero

Membre depuis le 11/05/09

44 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 6-1, Maness Fall 2009 Membre de l'équipe Cal Poly, Team 6-1, Maness Fall 2009

CPSU-MANESS-F09S6G1

5 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 10

7 derniers jours : 54

30 derniers jours : 253

Total : 28,564