Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
-
Retirez les deux vis cruciformes Phillips fixant le cache de la batterie à la console portable.
-
Retirez le cache de la batterie de l'arrière de la DSi XL.
-
-
-
Retirez les quatre cache-vis en caoutchouc du boîtier inférieur en les soulevant à l'aide d'une punaise.
-
-
-
Avec une spatule (spudger), faites levier pour enlever la nappe du microphone de la carte mère.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
With the console still upside-down, open the DSi XL slightly.
-
Push the lower display away from the upper case.
-
Remove the lower display from the DSi XL.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Turn the DSi XL over and open the display.
-
Use a pushpin to remove the four plastic screw covers on the front bezel.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the four 3.5 mm silver Phillips screws securing the rear bezel to the front bezel.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using two hands, gently slide the rear bezel upwards.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Insert a spudger into the gap between the front and rear bezel.
-
Rotate the spudger away from the DSi XL, prying the two bezels apart.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
In the same manner as described above, continue prying along the top edge of the front and rear bezels.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using the flat end of a spudger, pry the rear camera off the rear bezel.
-
Remove the rear bezel.
-