Réparez vos affaires Communauté Boutique

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Nintendo DSi XL Touchscreen Replacement

Introduction

The lower display screen on the DSi XL is touch-sensitive. Regain touch control over your DSi with a new touchscreen.

Ce dont vous avez besoin

  1. Nintendo DSi XL Touchscreen Replacement, Battery: étape 1, image 1 de 2 Nintendo DSi XL Touchscreen Replacement, Battery: étape 1, image 2 de 2

    • Remove the two Phillips screws securing the battery cover to the back of the handheld console.

    • Lift the battery cover off the back of the DSi XL.

    Traduire

  2. Nintendo DSi XL Touchscreen Replacement: étape 2, image 1 de 1

    • Lift the battery from the DSi XL.

    Traduire

  3. Nintendo DSi XL Touchscreen Replacement, Lower Case: étape 3, image 1 de 3 Nintendo DSi XL Touchscreen Replacement, Lower Case: étape 3, image 2 de 3 Nintendo DSi XL Touchscreen Replacement, Lower Case: étape 3, image 3 de 3

    • Remove the four rubber screw covers on the lower case by prying them up with a push pin.

    Traduire

  4. Nintendo DSi XL Touchscreen Replacement: étape 4, image 1 de 1

    • Remove the following seven Phillips screws that secure the lower case to the rest of the DSi XL:

    • Four silver 5.3 mm screws

    • Two black 5.3 mm screws

    • One black 2.5 mm screw

    Traduire

  5. Nintendo DSi XL Touchscreen Replacement: étape 5, image 1 de 3 Nintendo DSi XL Touchscreen Replacement: étape 5, image 2 de 3 Nintendo DSi XL Touchscreen Replacement: étape 5, image 3 de 3

    • Turn the DSi XL over, and open the display.

    • Insert a spudger between the upper and lower case at the bottom left corner of the DSi.

    • Slide the spudger along the bottom edge of the upper case to release the latches securing the upper case to the lower case.

    Traduire

  6. Nintendo DSi XL Touchscreen Replacement: étape 6, image 1 de 2 Nintendo DSi XL Touchscreen Replacement: étape 6, image 2 de 2

    • Close the display and turn the DSi XL over.

    • Lift the lower case from the front edge.

    • Rotate the lower case away from the DSi.

    • The lower case cannot be completely removed yet, since it is still connected to the motherboard.

    Traduire

  7. Nintendo DSi XL Touchscreen Replacement: étape 7, image 1 de 2 Nintendo DSi XL Touchscreen Replacement: étape 7, image 2 de 2

    • Using a spudger, pry the SD card/right shoulder button connector off its socket.

    • Pry the volume button/left shoulder button connector off its socket on the motherboard with a spudger.

    Traduire

  8. Nintendo DSi XL Touchscreen Replacement, Wi-Fi Board: étape 8, image 1 de 2 Nintendo DSi XL Touchscreen Replacement, Wi-Fi Board: étape 8, image 2 de 2

    • Lift the Wi-Fi board up off its socket on the motherboard.

    • Do not attempt to completely remove the Wi-Fi board yet. It is attached to the motherboard by an antenna cable.

    Traduire

  9. Nintendo DSi XL Touchscreen Replacement: étape 9, image 1 de 1

    • Use a spudger to pry the Wi-Fi cable off its socket on the underside of the Wi-Fi board.

    Traduire

  11. Nintendo DSi XL Touchscreen Replacement, Motherboard: étape 10, image 1 de 1

    • Use a spudger to pry the microphone cable off the motherboard.

    • Pry from underneath the cable.

    Traduire

  12. Nintendo DSi XL Touchscreen Replacement: étape 11, image 1 de 2 Nintendo DSi XL Touchscreen Replacement: étape 11, image 2 de 2

    • Using the flat end of a spudger, flip up the retaining flap on the camera ribbon ZIF connector.

    • Use the pointed end of a spudger to pull the camera ribbon from the ZIF connector.

    Traduire

  13. Nintendo DSi XL Touchscreen Replacement: étape 12, image 1 de 2 Nintendo DSi XL Touchscreen Replacement: étape 12, image 2 de 2

    • Using the flat end of a spudger, flip up the retaining flap on the touchscreen cable ZIF connector.

    • With the pointed end of the spudger, pull the touchscreen cable from its connector on the motherboard.

    Traduire

  14. Nintendo DSi XL Touchscreen Replacement: étape 13, image 1 de 2 Nintendo DSi XL Touchscreen Replacement: étape 13, image 2 de 2

    • Using the flat end of a spudger, flip up the retaining flap on the backlight cable ZIF connector.

    • With the pointed end of the spudger, pull the backlight cable from its connector on the motherboard.

    Traduire

  15. Nintendo DSi XL Touchscreen Replacement: étape 14, image 1 de 2 Nintendo DSi XL Touchscreen Replacement: étape 14, image 2 de 2

    • Using the flat end of a spudger, flip up the retaining flap on the lower display data cable ZIF connector.

    • With the pointed end of the spudger, pull the lower display data cable from its connector on the motherboard.

    Traduire

  16. Nintendo DSi XL Touchscreen Replacement: étape 15, image 1 de 2 Nintendo DSi XL Touchscreen Replacement: étape 15, image 2 de 2

    • Using the flat end of a spudger, flip up the retaining flap on the ZIF connector for the D-Pad/power button cable.

    • With the pointed end of the spudger, pull the D-Pad/power button cable from its connector on the motherboard.

    Traduire

  17. Nintendo DSi XL Touchscreen Replacement: étape 16, image 1 de 1

    • Using the flat end of the spudger, pry the battery cable up off its socket on the motherboard.

    Traduire

  18. Nintendo DSi XL Touchscreen Replacement: étape 17, image 1 de 1

    • Remove the screws securing the motherboard to the upper case:

    • A single 2.5 mm silver Phillips screw

    • Four 3.7 mm black Phillips screws

    Traduire

  19. Nintendo DSi XL Touchscreen Replacement: étape 18, image 1 de 1

    • Deroute the microphone and antenna cables through the slot in the motherboard.

    Traduire

  20. Nintendo DSi XL Touchscreen Replacement: étape 19, image 1 de 2 Nintendo DSi XL Touchscreen Replacement: étape 19, image 2 de 2

    • Rotate the motherboard off the lower case.

    • The motherboard cannot be completely removed yet. It is still attached by the upper LCD's display data ribbon cable.

    Traduire

  21. Nintendo DSi XL Touchscreen Replacement: étape 20, image 1 de 2 Nintendo DSi XL Touchscreen Replacement: étape 20, image 2 de 2

    • Using the flat end of a spudger, flip up the retaining flap on the upper display data cable ZIF connector.

    • With the pointed end of the spudger, pull the upper display data cable from its connector on the underside of the motherboard.

    • The motherboard is now free from the upper case.

    Traduire

  22. Nintendo DSi XL Touchscreen Replacement, Lower Display Assembly: étape 21, image 1 de 2 Nintendo DSi XL Touchscreen Replacement, Lower Display Assembly: étape 21, image 2 de 2

    • With the console still upside-down, open the DSi XL slightly.

    • Push the lower display away from the upper case.

    • Remove the lower display from the DSi XL.

    Traduire

  23. Nintendo DSi XL Touchscreen Replacement, Lower LCD: étape 22, image 1 de 2 Nintendo DSi XL Touchscreen Replacement, Lower LCD: étape 22, image 2 de 2

    • Insert a spudger between the touchscreen and top right corner of the display.

    • Slide the spudger down the right side of the display to free the edge of the touchscreen.

    Traduire

  24. Nintendo DSi XL Touchscreen Replacement: étape 23, image 1 de 2 Nintendo DSi XL Touchscreen Replacement: étape 23, image 2 de 2

    • Continue around the bottom right corner of the display with the spudger.

    • Slide the spudger along the bottom edge of the touchscreen to separate it from the display.

    Traduire

  25. Nintendo DSi XL Touchscreen Replacement: étape 24, image 1 de 2 Nintendo DSi XL Touchscreen Replacement: étape 24, image 2 de 2

    • Continue around the bottom left corner of the display with a spudger.

    • Slide the spudger along the left edge of the touchscreen to remove it from the display.

    Traduire

  26. Nintendo DSi XL Touchscreen Replacement: étape 25, image 1 de 2 Nintendo DSi XL Touchscreen Replacement: étape 25, image 2 de 2

    • With three sides freed, remove the touchscreen from the lower display.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

15 autres ont terminé cette réparation.

Auteur

avec 6 autres contributeurs

David Hodson

Membre depuis le 04/13/10

150 458 Réputation

127 tutoriels rédigés

Badges: 53

+ 50 badges supplémentaires

3 commentaires

Great tutorial, I completely missed the fact that the lower screen is TWO screens: the touchscreen and the proper screen. Nailed it!!

luissebastianangeles - Réponse

thankyou! <3

Zenn22 - Réponse

Step 16 = whole socket came off the motherboard with the least amount of effort. Tried soldering new contacts but too fine. Device now only good for parts.

Reese Banister - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 8

7 derniers jours : 85

30 derniers jours : 369

Total : 42,542