Aller au contenu principal

Introduction

The brightness switch is the circular button with a sun symbol engraved into it. The brightness switch is located at the top of the button panel.

  1. Use a standard Phillips #00 screwdriver to loosen the 4 mm screw that keeps the battery cover attached to the device.
    • Use a standard Phillips #00 screwdriver to loosen the 4 mm screw that keeps the battery cover attached to the device.

  2. Lift the battery cover up and remove it from the device.
    • Lift the battery cover up and remove it from the device.

    • The screw will remain attached to the battery cover because of Nintendo's design.

  3. Use your fingers or a plastic opening tool to remove the battery from the device.
    • Use your fingers or a plastic opening tool to remove the battery from the device.

    • Caution: Please exercise caution when handling the battery. If it appears to be swelling or damaged at all it is considered a fire hazard.

  4. Remove four 6.5 mm screws from the corners of the back cover using a tri-point Y00 screwdriver. Remove two 4.6mm screws from the top-center and bottom-center of the device using a tri-point Y00 screwdriver.
    • Remove four 6.5 mm screws from the corners of the back cover using a tri-point Y00 screwdriver.

    • Remove two 4.6mm screws from the top-center and bottom-center of the device using a tri-point Y00 screwdriver.

  5. Lift the back cover off of the device.
    • Lift the back cover off of the device.

    • Potential for device damage: These inner components are vulnerable to static electricity. Exercise caution when handling these next steps to prevent damaging the device.

  6. Using a Phillips #00 screwdriver, remove the three Phillips #00 4 mm long screws that hold the motherboard to the button panel.
    • Using a Phillips #00 screwdriver, remove the three Phillips #00 4 mm long screws that hold the motherboard to the button panel.

  7. Be careful not to tear the ribbon cable that's connected to the screen. If you tear it, games will not appear on the device's screen!
    • Be careful not to tear the ribbon cable that's connected to the screen. If you tear it, games will not appear on the device's screen!

    • Flip the motherboard up and rest it on the other half of the device, so that the back of the buttons are visible as seen in the picture.

  8. With your fingers, lift the track pad out off the brightness switch.
    • With your fingers, lift the track pad out off the brightness switch.

    • Keep the track pad clean. A dirty or dusty track pad will lead to the brightness switch not working when you press it.

  9. Using tweezers, lift the brightness switch out of the Game Boy Advance SP.
    • Using tweezers, lift the brightness switch out of the Game Boy Advance SP.

Conclusion

To reassemble your device, follow these instructions in reverse order.

10 autres ont terminé cette réparation.

DJ Pantone

Membre depuis le 11/01/2013

1 543 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 17-22, Forte Winter 2013 Membre de l'équipe Cal Poly, Team 17-22, Forte Winter 2013

CPSU-FORTE-W13S17G22

4 membres

32 tutoriels rédigés

Thank you so much

sherzadcemil - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 5

7 derniers jours : 22

30 derniers jours : 106

Total : 13,932