Nintendo Game Boy Advance SP Brightness Switch Replacement

Introduction

The brightness switch is the circular button with a sun symbol engraved into it. The brightness switch is located at the top of the button panel.

Ce dont vous avez besoin

Étape 1 Battery

Nintendo Game Boy Advance SP Brightness Switch Replacement, Battery: étape 1, image 1 de 1

Use a standard Phillips #00 screwdriver to loosen the 4 mm screw that keeps the battery cover attached to the device.

Traduire

Quel est le nom du vis svp je l'ai perdu et j'ai pas la référence

la chaîne de Samarium - 2 avr. 2023 Réponse

Bonjour @lachainede96340 D'après les instructions du tutoriel, il s'agit d'une vis Phillips (ou cruciforme) #00 de 4 mm de long. Ces mesures devraient suffire pour trouver une vis de remplacement dans votre stock de vis ou en magasin le cas échéant.

Claire Miesch - 6 avr. 2023

Étape 2

Lift the battery cover up and remove it from the device.
The screw will remain attached to the battery cover because of Nintendo's design.

Traduire

Étape 3

Use your fingers or a plastic opening tool to remove the battery from the device.
Caution: Please exercise caution when handling the battery. If it appears to be swelling or damaged at all it is considered a fire hazard.

Traduire

Étape 4 Back Cover

Nintendo Game Boy Advance SP Brightness Switch Replacement, Back Cover: étape 4, image 1 de 2

Nintendo Game Boy Advance SP Brightness Switch Replacement, Back Cover: étape 4, image 2 de 2

Remove four 6.5 mm screws from the corners of the back cover using a tri-point Y00 screwdriver.
Remove two 4.6mm screws from the top-center and bottom-center of the device using a tri-point Y00 screwdriver.

Traduire

Étape 5

Lift the back cover off of the device.
Potential for device damage: These inner components are vulnerable to static electricity. Exercise caution when handling these next steps to prevent damaging the device.
Look out for the power switch that can fall out when taking the back cover off.

Traduire

Étape 6 Motherboard

Nintendo Game Boy Advance SP Brightness Switch Replacement, Motherboard: étape 6, image 1 de 1

Using a Phillips #00 screwdriver, remove the three Phillips #00 4 mm long screws that hold the motherboard to the button panel.

Traduire

Étape 7

Be careful not to tear the ribbon cable that's connected to the screen. If you tear it, games will not appear on the device's screen!
Flip the motherboard up and rest it on the other half of the device, so that the back of the buttons are visible as seen in the picture.

Traduire

My Game Boy Advance SP has a problem where it won’t charge the device. The Game Boy is plugged in but the charge light does not go on. How may I turn it back on? What, inside the system, needs to be fixed? Is it one of the cables behind the charging socket inside the Game Boy?

Connor Hutton - 23 juil. 2021 Réponse

Étape 8 Brightness Switch

Nintendo Game Boy Advance SP Brightness Switch Replacement, Brightness Switch: étape 8, image 1 de 1

With your fingers, lift the track pad out off the brightness switch.
Keep the track pad clean. A dirty or dusty track pad will lead to the brightness switch not working when you press it.

Traduire