Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

The power switch is located on right side of the Game Boy Advance SP's button panel. It is a grey switch that dictates whether the device is powered on or powered off.

  1. Use a standard Phillips #00 screwdriver to loosen the 4 mm screw that keeps the battery cover attached to the device.
    • Use a standard Phillips #00 screwdriver to loosen the 4 mm screw that keeps the battery cover attached to the device.

  2. Lift the battery cover up and remove it from the device.
    • Lift the battery cover up and remove it from the device.

    • The screw will remain attached to the battery cover because of Nintendo's design.

  3. Use your fingers or a plastic opening tool to remove the battery from the device.
    • Use your fingers or a plastic opening tool to remove the battery from the device.

    • Caution: Please exercise caution when handling the battery. If it appears to be swelling or damaged at all it is considered a fire hazard.

  4. Remove four 6.5 mm screws from the corners of the back cover using a tri-point Y00 screwdriver. Remove two 4.6mm screws from the top-center and bottom-center of the device using a tri-point Y00 screwdriver.
    • Remove four 6.5 mm screws from the corners of the back cover using a tri-point Y00 screwdriver.

    • Remove two 4.6mm screws from the top-center and bottom-center of the device using a tri-point Y00 screwdriver.

  5. Lift the back cover off of the device.
    • Lift the back cover off of the device.

    • Potential for device damage: These inner components are vulnerable to static electricity. Exercise caution when handling these next steps to prevent damaging the device.

  6. Locate the power switch cover on the left side of the device and lift it up and out of the slot using your fingers or tweezers. Locate the power switch cover on the left side of the device and lift it up and out of the slot using your fingers or tweezers.
    • Locate the power switch cover on the left side of the device and lift it up and out of the slot using your fingers or tweezers.

Conclusion

To reassemble your device, follow these instructions in reverse order.

10 autre(s) ont terminé cette réparation.

DJ Pantone

Membre depuis le 11/01/2013

1 474 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 17-22, Forte Winter 2013 Membre de l'équipe Cal Poly, Team 17-22, Forte Winter 2013

CPSU-FORTE-W13S17G22

4 membres

32 tutoriels rédigés

This doesn't explain anything about how to replace the switch

Michael - Réponse

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 5

7 derniers jours : 26

30 derniers jours : 175

Total : 13,967