Nintendo Game Boy Advance SP Power Switch Cover Replacement

Introduction

The power switch is located on right side of the Game Boy Advance SP's button panel. It is a grey switch that dictates whether the device is powered on or powered off.

Ce dont vous avez besoin

Étape 1 Battery

Nintendo Game Boy Advance SP Power Switch Cover Replacement, Battery: étape 1, image 1 de 1

Use a standard Phillips #00 screwdriver to loosen the 4 mm screw that keeps the battery cover attached to the device.

Traduire

Quel est le nom du vis svp je l'ai perdu et j'ai pas la référence

la chaîne de Samarium - 2 avr. 2023 Réponse

Bonjour @lachainede96340 D'après les instructions du tutoriel, il s'agit d'une vis Phillips (ou cruciforme) #00 de 4 mm de long. Ces mesures devraient suffire pour trouver une vis de remplacement dans votre stock de vis ou en magasin le cas échéant.

Claire Miesch - 6 avr. 2023

Étape 2

Lift the battery cover up and remove it from the device.
The screw will remain attached to the battery cover because of Nintendo's design.

Traduire

Étape 3

Use your fingers or a plastic opening tool to remove the battery from the device.
Caution: Please exercise caution when handling the battery. If it appears to be swelling or damaged at all it is considered a fire hazard.

Traduire

Étape 4 Back Cover

Nintendo Game Boy Advance SP Power Switch Cover Replacement, Back Cover: étape 4, image 1 de 2

Nintendo Game Boy Advance SP Power Switch Cover Replacement, Back Cover: étape 4, image 2 de 2

Remove four 6.5 mm screws from the corners of the back cover using a tri-point Y00 screwdriver.
Remove two 4.6mm screws from the top-center and bottom-center of the device using a tri-point Y00 screwdriver.

Traduire

Étape 5

Lift the back cover off of the device.
Potential for device damage: These inner components are vulnerable to static electricity. Exercise caution when handling these next steps to prevent damaging the device.
Look out for the power switch that can fall out when taking the back cover off.