Réparez vos affaires Communauté Boutique

Nintendo GameCube Controller Joystick Replacement

Introduction

This guide will take you through the steps of removing the joystick. This will come in handy if you have a rogue joystick

Ce dont vous avez besoin

  1. Nintendo GameCube Controller Joystick Replacement, Back Panel: étape 1, image 1 de 1

    • Place the controller (buttons down) on a solid surface.

    • Remove the six 9.2mm Tri-wing Y0 screws that hold the back panel in place.

    Traduire

  2. Nintendo GameCube Controller Joystick Replacement: étape 2, image 1 de 1

    • Gently lift the back panel up, separating it from the front panel.

    • Some of the buttons may fall out if they are knocked around.

    Traduire

  4. Nintendo GameCube Controller Joystick Replacement, Z Button: étape 3, image 1 de 2 Nintendo GameCube Controller Joystick Replacement, Z Button: étape 3, image 2 de 2

    • Grab the Z-button by the peg with tweezers and lift it out of the controller.

    • During re-assembly, make sure the plastic rim and spring fit into the slot provided, or else the case will not shut.

    Traduire

  5. Nintendo GameCube Controller Joystick Replacement, Circuit Board: étape 4, image 1 de 1

    • Carefully unhook the cable that is looped around the peg.

    Traduire

  6. Nintendo GameCube Controller Joystick Replacement: étape 5, image 1 de 1

    • Lift the circuit board out of the controller.

    • Do not grab the rumble motor to lift the circuit board as shown in the picture. It will in many cases just remove the rumble motor. Instead, grab the edges of the board.

    Traduire

  7. Nintendo GameCube Controller Joystick Replacement, Joystick: étape 6, image 1 de 2 Nintendo GameCube Controller Joystick Replacement, Joystick: étape 6, image 2 de 2

    • Grab the base of the grey cover and pull it off.

    • During reassembly, make sure the slots inside the joy stick line up so they can fit back together.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

29 autres ont terminé cette réparation.

Auteur

avec 4 autres contributeurs

Sean Michel

Membre depuis le 01/14/13

2 496 Réputation

8 tutoriels rédigés

Badges: 17

+ 14 badges supplémentaires

Équipe

Cal Poly, Team 19-44, Regan Winter 2013 Membre de l'équipe Cal Poly, Team 19-44, Regan Winter 2013

CPSU-REGAN-W13S19G44

4 membres

26 tutoriels rédigés

13 commentaires

Great guide, but I'm looking to buy replacement joysticks and I can't find them anywhere. Where would I find those?

Joe Freedman - Réponse

When I removed the joystick it would come off. The plastic was stuck too hard to the joystick so I accidentally broke it in half. Is there anyway to glue it back together?

Mattias Wirsenius - Réponse

@Tyler Lovejoy - That's already part of the controller.

@Joe Freedman - Try Amazon.com

@Mattias Wirsenius - At this point it would be best to buy a new controller.

builderman1q2w3e4r - Réponse

This guide is quite unhelpful; it tells you how to remove the stick but not how to repair it. My controller's joystick has sunken into the controller and stays slightly tilted if i move it to the right. Yet when I go to the "rogue joystick" portion of the troubleshooting guide, it tells me to repair the joystick if it's not correctly attached to the motherboard. Seriously, there needs to be a more in-depth guide if such repairs are possible.

J DC - Réponse

without taking the controller completely apart, pull the joystick straight up with your hand

McRedstoneYT -

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 8

7 derniers jours : 75

30 derniers jours : 334

Total : 98,484