Introduction
Removing these panels allows further access to the GameCube's components.
Ce dont vous avez besoin
-
-
Turn over the Gamecube so that the bottom side is facing up.
-
Use the 4.5 mm Gamebit screwdriver to remove all four screws.
-
-
-
-
Gently press down on the clips located on either side of the the back panel, as shown, and carefully remove it from the main part of the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
4 autres ont terminé cette réparation.