Nintendo NES Advantage Start Button Replacement

Introduction

If your Nintendo NES Advantage Model NES-026 Start Button is not being responsive to being pressed, although plugged into NES, you may need to replace the Start Button, using this guide.

The Start Button is an input sensory button used for starting and pausing the game.

Ce dont vous avez besoin

Étape 1 Back Panel

Nintendo NES Advantage Start Button Replacement, Back Panel: étape 1, image 1 de 1

Remove the four sticky pads from the bottom of the device.
If the pads are stuck, use a spudger to remove them.

Modifier

Étape 2

Remove the six 8 mm screws from the bottom of the device with a Phillips #0 screwdriver.
Use your hands to pull the back panel away from the controller.

Modifier

Étape 3 Circuit Board

Nintendo NES Advantage Start Button Replacement, Circuit Board: étape 3, image 1 de 2

Nintendo NES Advantage Start Button Replacement, Circuit Board: étape 3, image 2 de 2

Remove the three 14 mm screws from the gray cross with a Phillips #0 screwdriver.
Lift the gray component away from the device.

Modifier

Étape 4

Lift up the black wire and move it to the side.

Modifier

Étape 5

Nintendo NES Advantage Start Button Replacement: étape 5, image 3 de 3

Remove the two silver knobs on the front of the device.
Unscrew the two silver nuts using a flathead screwdriver.
Remove each silver nut and silver washer using a pair of tweezers.

Modifier

Étape 6

Remove the remaining three 8 mm screws on the circuit board with a Phillips #0 screwdriver.
Remove the silver bracket from the top of the circuit board.

Modifier