Réparez vos affaires Communauté Boutique

Nishiki Aero II Tire Removal

Introduction

This guide will walk you through how to quickly and efficiently remove the tire from your Nishiki Aero II bicycle in five simple steps! This guide may be used to help you remove damaged or flat tires for replacement! Before you begin, there is no special skills needed for this removal. All you need is to familiarize yourself with the tools listed and get started!

Ce dont vous avez besoin

  1. Nishiki Aero II Tire Removal, Removing Road Bike Front Wheel: étape 1, image 1 de 1

    • Turn the bike upside down.

    Modifier

  2. Nishiki Aero II Tire Removal: étape 2, image 1 de 1

    • Use a wrench to loosen the nut holding the wheel's axle on one side.

    • Once it's loose enough, continue removing the nut with your hand.

    Modifier

  3. Nishiki Aero II Tire Removal: étape 3, image 1 de 2 Nishiki Aero II Tire Removal: étape 3, image 2 de 2

    • After removing the nut, also remove the washer under it.

    • Keep note of how the washer has a small appendage that locks into a slot in the fork.

    Modifier

  4. Nishiki Aero II Tire Removal: étape 4, image 1 de 1

    • Follow the previous steps for the opposite side.

    Modifier

  5. Nishiki Aero II Tire Removal: étape 5, image 1 de 1

    • Lift the wheel up from the fork.

    Modifier

  6. Nishiki Aero II Tire Removal, Nishiki Aero II Tire Removal: étape 6, image 1 de 2 Nishiki Aero II Tire Removal, Nishiki Aero II Tire Removal: étape 6, image 2 de 2

    • Unscrew the cap from the air valve.

    • Release the tire's air by pressing a thin object on the center pin of the valve.

    • A hex wrench or any blunt object can be used.

    Modifier

  7. Nishiki Aero II Tire Removal: étape 7, image 1 de 3 Nishiki Aero II Tire Removal: étape 7, image 2 de 3 Nishiki Aero II Tire Removal: étape 7, image 3 de 3

    • Wedge a tire lever between the tire and the rim. Grab the tire with the lever's inward scoop.

    • Grab the tire's edge with the lever and pull it back to scoop the tire from the rim.

    • Keep the tire lever anchored on a spoke with the notch on the lever's opposite end.

    Modifier

  8. Nishiki Aero II Tire Removal: étape 8, image 1 de 2 Nishiki Aero II Tire Removal: étape 8, image 2 de 2

    • Repeat with an additional tire lever five inches away from the other.

    Modifier

  9. Nishiki Aero II Tire Removal: étape 9, image 1 de 3 Nishiki Aero II Tire Removal: étape 9, image 2 de 3 Nishiki Aero II Tire Removal: étape 9, image 3 de 3

    • Repeat with a third tire lever farther around the tire.

    • Alternate lifting the second and third levers until the tire comes partway off.

    Modifier

  10. Nishiki Aero II Tire Removal: étape 10, image 1 de 3 Nishiki Aero II Tire Removal: étape 10, image 2 de 3 Nishiki Aero II Tire Removal: étape 10, image 3 de 3

    • Wedge the tire off of the other rim with the tire levers.

    • Pull the air valve from its hole in the rim to completely remove the tire.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 8 autres contributeurs

Tobias Elder

Membre depuis le 04/25/13

113 Réputation

7 tutoriels rédigés

Badges: 6

+ 3 badges supplémentaires

Équipe

Cal Poly, Team 21-53, Johann Spring 2013 Membre de l'équipe Cal Poly, Team 21-53, Johann Spring 2013

CPSU-JOHANN-S13S21G53

4 membres

7 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 9

Total : 1,213