Aller au contenu principal
  1. Cette étape n’est pas traduite. Aidez à la traduire

    Using the thumbtab molded on the bottom of the phone, pry the back cover off using either a fingernail or a plastic opening tool. Using the thumbtab molded on the bottom of the phone, pry the back cover off using either a fingernail or a plastic opening tool.
    • Using the thumbtab molded on the bottom of the phone, pry the back cover off using either a fingernail or a plastic opening tool.

  2. Cette étape n’est pas traduite. Aidez à la traduire

    There is a molded notch in the white frame of the phone near the top right of the battery.  Using either a finger or a plastic opening tool, utilize the notch to lift up on the battery, and remove it from the device. This specific device did not come with a battery.
    • There is a molded notch in the white frame of the phone near the top right of the battery. Using either a finger or a plastic opening tool, utilize the notch to lift up on the battery, and remove it from the device.

    • This specific device did not come with a battery.

  3. Cette étape n’est pas traduite. Aidez à la traduire

    Using a T5 screwdriver bit, remove the (6) 5.0 mm screws along the outside edge of the frame. Using a metal spudger, wedge the 6 plastic tabs molded into the outer shell away from the frame to lift up and remove it. Using a metal spudger, wedge the 6 plastic tabs molded into the outer shell away from the frame to lift up and remove it.
    • Using a T5 screwdriver bit, remove the (6) 5.0 mm screws along the outside edge of the frame.

    • Using a metal spudger, wedge the 6 plastic tabs molded into the outer shell away from the frame to lift up and remove it.

  4. Cette étape n’est pas traduite. Aidez à la traduire

    Use a spudger to simultaneously leverage the shell away and the motherboard up from the body of the shell. Use a spudger to simultaneously leverage the shell away and the motherboard up from the body of the shell. Use a spudger to simultaneously leverage the shell away and the motherboard up from the body of the shell.
    • Use a spudger to simultaneously leverage the shell away and the motherboard up from the body of the shell.

  5. Cette étape n’est pas traduite. Aidez à la traduire

    With the motherboard removed, the only thing holding the screen into place is the snap plug on the back of the motherboard. Using a spudger, leverage the top snap up to disconnect it (photo shows motherboard rotated 90 degrees counterclockwise). Using a spudger, leverage the top snap up to disconnect it (photo shows motherboard rotated 90 degrees counterclockwise).
    • With the motherboard removed, the only thing holding the screen into place is the snap plug on the back of the motherboard.

    • Using a spudger, leverage the top snap up to disconnect it (photo shows motherboard rotated 90 degrees counterclockwise).

Ligne d'arrivée

3 autres ont terminé cette réparation.

Aaron LeBlanc

Membre depuis le 24/10/2018

648 Réputation

5 tutoriels rédigés

Équipe

UMass Dartmouth, Team S3-G3, Peak Fall 2018 Membre de l'équipe UMass Dartmouth, Team S3-G3, Peak Fall 2018

UMASSD-PEAK-F18S3G3

3 membres

8 tutoriels rédigés

2 commentaires

If you can break the screen without taking it apart, then you must not be human

Feyrowan - Réponse

The Cylons are greeting you.

M. H. -

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 21

Total : 906