Introduction

Use this guide to remove and repair the inside display screen.

Pièces

Aucune pièce nécessaire.

This step does not require much force.
  • This step does not require much force.

  • Use the plastic opening tool to pry between the seam of the black phone cover which is located at the base of the screen.

Ajouter un commentaire

Have a container ready to keep track of small parts.
  • Have a container ready to keep track of small parts.

  • Use the t6 screwdriver to remove the two visible screws that are immediately below the screen.

Ajouter un commentaire

  • Keep the phone closed, and slide the Ipod tool between the the silver and black phone case. Use the tool to slide all the way around the case to release the catches.

Ajouter un commentaire

  • Pull out the circuit board, which will remove it completely from the case

Ajouter un commentaire

  • If the metal case is not already free, simultaneously release the metal tabs on both sides of the metal casing to remove the display screen.

Ajouter un commentaire

  • Be gentle when pulling off the display screen. If pulled too hard, the orange connecting ribbon will rip.

  • Lift off the display screen and disconnect it from the circuit board.

Ajouter un commentaire

Ligne d'arrivée

Une autre personne a terminé cette réparation.

Alex Graebe

Membre depuis le 15/04/2010

1 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 23-78, Johann Spring 2010 Membre de l'équipe Cal Poly, Team 23-78, Johann Spring 2010

CPSU-JOHANN-S10S23G78

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 3,998