Aller au contenu principal

Nokia 6102i Keyboard Replacement

Ce dont vous avez besoin

  1. Nokia 6102i Keyboard Replacement, Battery: étape 1, image 1 de 3 Nokia 6102i Keyboard Replacement, Battery: étape 1, image 2 de 3 Nokia 6102i Keyboard Replacement, Battery: étape 1, image 3 de 3
    • Press and hold the button at the bottom of the back side of the phone while sliding the back plate down to remove the back cover.

    • Note: Images on the right side may be hovered over to reveal larger versions.

  2. Nokia 6102i Keyboard Replacement: étape 2, image 1 de 1
    • Lift up the battery from the inside of the phone.

    • Make sure to lift up from the bottom of the battery as shown.

  3. Nokia 6102i Keyboard Replacement, Logic Board: étape 3, image 1 de 2 Nokia 6102i Keyboard Replacement, Logic Board: étape 3, image 2 de 2
    Outil utilisé dans cette étape :
    T6 Torx Screwdriver
    $9.99
    J'achète
    • Using a .208 head T-6 Screwdriver remove the two screws at the bottom of the battery cavity.

  4. Nokia 6102i Keyboard Replacement: étape 4, image 1 de 2 Nokia 6102i Keyboard Replacement: étape 4, image 2 de 2
    • Use a plastic opening tool to remove the silver cover over the antenna.

    • The covering may not pop right off. It may require some prying in different locations around the top covering.

  5. Nokia 6102i Keyboard Replacement: étape 5, image 1 de 2 Nokia 6102i Keyboard Replacement: étape 5, image 2 de 2
    • Remove the two newly revealed .208 inch screws at the top using a T-6 screwdriver.

  6. Nokia 6102i Keyboard Replacement: étape 6, image 1 de 2 Nokia 6102i Keyboard Replacement: étape 6, image 2 de 2
    • WARNING: Use extreme caution when removing and handling the logic board as it is very fragile.

    • With caution, use a plastic prier to separate the back silver casing from the front of the phone. This may require force.

    • Disconnect the logic board from the small orange chip.

  7. Nokia 6102i Keyboard Replacement, Keyboard: étape 7, image 1 de 2 Nokia 6102i Keyboard Replacement, Keyboard: étape 7, image 2 de 2
    • Pop out the keyboard from the frame.

    • Once the logic board is removed, the keypad can be easily popped out from the frame with very little force.

    • The picture is showing the three layers: the frame, the keyboard, and the logic board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jonathan Brophy

Membre depuis le 04/14/10

1 Réputation

3 tutoriels rédigés

Équipe

Cal Poly, Team 23-78, Johann Spring 2010 Membre de l'équipe Cal Poly, Team 23-78, Johann Spring 2010

CPSU-JOHANN-S10S23G78

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 3

Total : 1,914