Aller au contenu principal

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Nokia 6133 External/Main LCD Replacement

Ce dont vous avez besoin

  1. Nokia 6133 External/Main LCD Replacement, Battery: étape 1, image 1 de 2 Nokia 6133 External/Main LCD Replacement, Battery: étape 1, image 2 de 2
    • Remove the back cover of your cell phone by applying slight pressure with your thumb and pushing up towards the top of the phone.

    • Lift off back cover.

  2. Nokia 6133 External/Main LCD Replacement: étape 2, image 1 de 3 Nokia 6133 External/Main LCD Replacement: étape 2, image 2 de 3 Nokia 6133 External/Main LCD Replacement: étape 2, image 3 de 3
    • Use your index finger to first push down and then lift up the battery as shown.

    • Remove battery from cell phone.

  3. Nokia 6133 External/Main LCD Replacement, Keypad: étape 3, image 1 de 2 Nokia 6133 External/Main LCD Replacement, Keypad: étape 3, image 2 de 2
    • Unscrew two T5 torx screws easily visible on the back side of the cell phone

    • Screws: 7.8mm

    • Once screw are removed, the phone will separate easily into two pieces connected by a flexible wire strip.

    • Be sure to not lose or disconnect the indicated piece that the screw mounts to. It is spring loaded and is very dificult to reattach.

  4. Nokia 6133 External/Main LCD Replacement: étape 4, image 1 de 3 Nokia 6133 External/Main LCD Replacement: étape 4, image 2 de 3 Nokia 6133 External/Main LCD Replacement: étape 4, image 3 de 3
    • Use an iPod opening tool to gently pry open the back case as indicated in the picture.

    • Work your way down the side of the phone starting from the top down to the bottom. (Use multiple prying tools if necessary)

    • REPEAT on both sides, and be careful not to stab the circuitry with the tools.

  5. Nokia 6133 External/Main LCD Replacement: étape 5, image 1 de 3 Nokia 6133 External/Main LCD Replacement: étape 5, image 2 de 3 Nokia 6133 External/Main LCD Replacement: étape 5, image 3 de 3
    • Gently pull the phone apart and the flexible wire should detach from its connection as shown.

    • If not, lift up on the black tab within the left box in the picture.

    • With the front half of the phone, push the keypad towards the removed portion of the phone.

    • To clean, use a damp cloth with water.

  6. Nokia 6133 External/Main LCD Replacement, External/Main LCD: étape 6, image 1 de 2 Nokia 6133 External/Main LCD Replacement, External/Main LCD: étape 6, image 2 de 2
    • Using an iPod opening tool, pry open the case that houses the LCD screens by inserting it at the bottom as shown.

    • VERY FRAGILE!! Don't press hard on either side of the LED.

    • Run the tool all along the edge between the darker front case and silver back.

    • Rather difficult to open this part, be careful not to compromise the screens.

  7. Nokia 6133 External/Main LCD Replacement: étape 7, image 1 de 2 Nokia 6133 External/Main LCD Replacement: étape 7, image 2 de 2
    • Remove the first flex-wire connection by inserting your thumbnail directly underneath the connection as shown. Will pry off easily.

    • This flex-wire connects the LCD logic board to the main logic board removed earlier.

    • Remove the two other flex-wire connections at the top and bottom of the LCD logic board. Pry up on the respective connections as shown.

    • Square LCD logic board will detach now.

  8. Nokia 6133 External/Main LCD Replacement: étape 8, image 1 de 3 Nokia 6133 External/Main LCD Replacement: étape 8, image 2 de 3 Nokia 6133 External/Main LCD Replacement: étape 8, image 3 de 3
    • Pry back the associated tabs using your thumbnail or an iPod opening tool by pulling them away from the LCD panel.

    • LCD can now be removed easily.

    • To clean use any multipurpose lens cleaner and a soft cloth. DO NOT get lens cleaner on any electronic component!

    • Shown:

    • LCD (Main display side)

    • LCD logic board

    • Case that holds above components and camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Will

Membre depuis le 04/21/10

40 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 23-82, Johann Spring 2010 Membre de l'équipe Cal Poly, Team 23-82, Johann Spring 2010

CPSU-JOHANN-S10S23G82

4 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 4,602