Introduction

This guide will show you how to remove the phone's vibrator used for the vibrate ring setting

Pièces

Aucune pièce nécessaire.

  1. Press the button to remove the back cover. Pull the cover downward and lift it off while still pressing the button.
    • Press the button to remove the back cover.

    • Pull the cover downward and lift it off while still pressing the button.

  2. Lift the battery out of the phone by pushing down from the top and pulling out
    • Lift the battery out of the phone by pushing down from the top and pulling out

  3. Grip the front cover from the bottom.
    • Grip the front cover from the bottom.

  4. Lift the front cover off.
    • Lift the front cover off.

  5. Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.
    • Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.

  6. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  7. Insert spudger along edge of assembly and gently lift assembly away from case
    • Insert spudger along edge of assembly and gently lift assembly away from case

  8. Remove assembly from phone
    • Remove assembly from phone

  9. The logic board now sits on top of the phone.
    • The logic board now sits on top of the phone.

  10. Lift the logic board out of the phone.
    • Lift the logic board out of the phone.

  11. Locate battery charger connector
    • Locate battery charger connector

  12. Grasp top and bottom of battery charger connector on the left side
    • Grasp top and bottom of battery charger connector on the left side

  13. Lift out the battery charger connector
    • Lift out the battery charger connector

  14. Grasp vibrator which protrudes from the battery charger connector
    • Grasp vibrator which protrudes from the battery charger connector

  15. Lift the vibrator out of the battery charger connector.
    • Lift the vibrator out of the battery charger connector.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Colby Leslie

Membre depuis le 05/10/2010

1 Réputation

7 tutoriels rédigés

Équipe

Cal Poly, Team 22-3, Maness Fall 2010 Membre de l'équipe Cal Poly, Team 22-3, Maness Fall 2010

CPSU-MANESS-F10S22G3

4 membres

9 tutoriels rédigés

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,079