Introduction

How to take out and replace the Logic Board for the Nokia 8265 Cell Phone.

  1. Start by removing the face plate of the phone with a plastic tool.
    • Start by removing the face plate of the phone with a plastic tool.

    • Once plastic tool is wedged into the side of the phone, twist and leverage the face plate off.

    Ajouter un commentaire

  2. Once the face plate is off, you will have exposed the keypad.
    • Once the face plate is off, you will have exposed the keypad.

    Ajouter un commentaire

    • Simply remove the keypad from on top of the phone, and place it off to the side, leaving just the phone itself remaining

    Ajouter un commentaire

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Taking a very small screwdriver, carefully unscrew the six screws attaching the top layer of the screen from the body of the phone.

    • Make sure to remember what screw goes where.

    Ajouter un commentaire

    • Once the six screws are removed, you may take off the screen section of the phone, exposing the inner workings of the cell phone.

    Ajouter un commentaire

    • Be careful when removing the Logic Board from the body, lifting it with fingers on both sides.

    Ajouter un commentaire

    • Now you can put in your new Logic Board, and reassemble the phone.

    Ajouter un commentaire

Ligne d'arrivée

Jack

Membre depuis le 20/04/2012

1 Réputation

4 tutoriels rédigés

Équipe

SUNY Cortland, Team 1-1, Getto Spring 2012 Membre de l'équipe SUNY Cortland, Team 1-1, Getto Spring 2012

SUNYCORT-GETTO-S12S1G1

2 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 1,054