Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Pry the rear cover off the C5.
-
Upon removing the rear cover, the back side is left exposed.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift and remove the battery out of the C5's inner framework.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the microSD card (highlighted in orange) from its recess within the inner framework of the C5.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Carefully wedge the flat end of a plastic opening tool between the rear cover and inner framework.
-
Pry upwards to release the clips securing the bottom cover.
-
Repeat with both clips until the bottom cover is released.
-
Lift and remove the bottom cover away from the C5.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the following screws securing the inner framework and its plastic surround to the rest of the C5:
-
Four T6 Torx screws.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Wedge the flat end of a plastic opening tool between the front panel assembly retaining clip and the outer case (highlighted in blue).
-
Carefully pry the opening tool upwards to release the retaining clip securing the upper portion of the front panel assembly.
-
Run the flat edge of a plastic opening tool around the perimeter of the front panel assembly to release the remaining retaining clips.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use the flat end of a plastic opening tool to pry the digitizer cable connector up and out of its socket on the motherboard.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Using a heat gun or hairdryer, heat the top area of the front panel assembly for approximately 20 seconds.
-
Use your fingernails or a plastic opening tool to separate the glass from the front panel assembly. The glass is held to the front panel assembly by adhesive, it may require some work to free it.
-
Annulation : je n'ai pas terminé ce tutoriel.
10 autres ont terminé cette réparation.