Aller au contenu principal

Introduction

The Nokia Lumia 2520 has a display size of 10 inches. with a resolution of 1920 pixels by 1080 pixels at a PPI of 218 pixels per inch.

  1. Apply heat pad to each side of the device.
    • Apply heat pad to each side of the device.

    • When using any heat pad please use some form of padded gloves so you don't burn you fingers.

    • Microwave the pad for 30 seconds so an ample amount of heat is given on all four sides. Do not microwave more than once every two minutes.

  2. Insert the pick between the glass to separate the glass from the device. You can also use the suction cups to help lift the glass. When pulling the screen off the chassis be careful not to cut  the ribbon cable the connect the screen to the logic board. Take your time to pry open the screen from the chassis. In this process you can easily break the screen or crack it.
    • Insert the pick between the glass to separate the glass from the device. You can also use the suction cups to help lift the glass.

    • When pulling the screen off the chassis be careful not to cut the ribbon cable the connect the screen to the logic board.

    • Take your time to pry open the screen from the chassis. In this process you can easily break the screen or crack it.

  3. Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant

    Batteries pour ordinateurs portables

    Une réparation facile pour un gain en puissance max.

    Acheter maintenant
  4. Pull out the ribbon cable from its connection Once that done move on to remove the ribbon connection from the screen.
    • Pull out the ribbon cable from its connection

    • Once that done move on to remove the ribbon connection from the screen.

  5. Use the plastic pry tool to remove one of the connection. Use the plastic pry tool to remove one of the connection. Use the plastic pry tool to remove one of the connection.
    • Use the plastic pry tool to remove one of the connection.

  6. Once down everything is completed.
    • Once down everything is completed.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Daniel Chevalier

Membre depuis le 05/09/2018

121 Réputation

1 tutoriel rédigé

Équipe

Gateway, Team S1-G4, Luster Fall 2018 Membre de l'équipe Gateway, Team S1-G4, Luster Fall 2018

GCC-LUSTER-F18S1G4

5 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 7

Total : 144