Réparez vos affaires Communauté Boutique

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

Nokia Lumia 2520 Display Assembly Replacement

Introduction

The Nokia Lumia 2520 has a display size of 10 inches. with a resolution of 1920 pixels by 1080 pixels at a PPI of 218 pixels per inch.

Ce dont vous avez besoin

  1. Nokia Lumia 2520 Display Assembly Replacement, Display Assembly: étape 1, image 1 de 1

    • Apply heat pad to each side of the device.

    • When using any heat pad please use some form of padded gloves so you don't burn you fingers.

    • Microwave the pad for 30 seconds so an ample amount of heat is given on all four sides. Do not microwave more than once every two minutes.

    Traduire

  2. Nokia Lumia 2520 Display Assembly Replacement: étape 2, image 1 de 3 Nokia Lumia 2520 Display Assembly Replacement: étape 2, image 2 de 3 Nokia Lumia 2520 Display Assembly Replacement: étape 2, image 3 de 3

    • Insert the pick between the glass to separate the glass from the device. You can also use the suction cups to help lift the glass.

    • When pulling the screen off the chassis be careful not to cut the ribbon cable the connect the screen to the logic board.

    • Take your time to pry open the screen from the chassis. In this process you can easily break the screen or crack it.

    Traduire

  4. Nokia Lumia 2520 Display Assembly Replacement: étape 3, image 1 de 2 Nokia Lumia 2520 Display Assembly Replacement: étape 3, image 2 de 2

    • Pull out the ribbon cable from its connection

    • Once that done move on to remove the ribbon connection from the screen.

    Traduire

  5. Nokia Lumia 2520 Display Assembly Replacement: étape 4, image 1 de 3 Nokia Lumia 2520 Display Assembly Replacement: étape 4, image 2 de 3 Nokia Lumia 2520 Display Assembly Replacement: étape 4, image 3 de 3

    • Use the plastic pry tool to remove one of the connection.

    Traduire

  6. Nokia Lumia 2520 Display Assembly Replacement: étape 5, image 1 de 1

    • Once down everything is completed.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 4 autres contributeurs

Daniel Chevalier

Membre depuis le 09/05/18

121 Réputation

1 tutoriel rédigé

Badges: 2

Équipe

Gateway, Team S1-G4, Luster Fall 2018 Membre de l'équipe Gateway, Team S1-G4, Luster Fall 2018

GCC-LUSTER-F18S1G4

5 membres

5 tutoriels rédigés

Un commentaire

What if i clipped the ribbon cable step 2 told me not to... like in half? Springging for a new screen i assume. Ive repaired ribbons before and it doesnt look like theres enough cable left to splice.

Hunter - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 15

Total : 857