Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

  1. Cette étape n’est pas traduite. Aidez à la traduire

    Switch off the phone. Remove the battery and any installed SIM and memory cards. Remove the black tape near to the loudspeaker.
    • Switch off the phone.

    • Remove the battery and any installed SIM and memory cards.

    • Remove the black tape near to the loudspeaker.

  2. Cette étape n’est pas traduite. Aidez à la traduire

    Remove the 9x Torx T4 screws. Two of them are with the same head size but with a different length. Two of them are with the same head size but with a different length.
    • Remove the 9x Torx T4 screws.

    • Two of them are with the same head size but with a different length.

  3. Cette étape n’est pas traduite. Aidez à la traduire

    Use a plastic opening tool to remove the back cover. Careful unhook the display assembly flex cable. Careful unhook the display assembly flex cable.
    • Use a plastic opening tool to remove the back cover.

    • Careful unhook the display assembly flex cable.

  4. Cette étape n’est pas traduite. Aidez à la traduire

    Insert wisdom here. Insert wisdom here. Insert wisdom here.
    • Insert wisdom here.

  5. Cette étape n’est pas traduite. Aidez à la traduire

    Put some scotch tape to prevent the glass from scattering. Use a hot gun or hair dryer and warm the glass to soften the adhesive.
    • Put some scotch tape to prevent the glass from scattering.

    • Use a hot gun or hair dryer and warm the glass to soften the adhesive.

  6. Cette étape n’est pas traduite. Aidez à la traduire

    Start the separating from the upper right corner, where you have an hole in the middle frame. Use plastic tool to prevent the middle frame from scratches. Work slowly, you can cut your fingers.
    • Start the separating from the upper right corner, where you have an hole in the middle frame.

    • Use plastic tool to prevent the middle frame from scratches.

    • Work slowly, you can cut your fingers.

  7. Cette étape n’est pas traduite. Aidez à la traduire

    Clean the middle farme. Put adhesive tape 3MM. Be careful, don't cover the technological openings on the middle frame (for the light sensor, earpiece, etc.).
    • Clean the middle farme.

    • Put adhesive tape 3MM.

    • Be careful, don't cover the technological openings on the middle frame (for the light sensor, earpiece, etc.).

    • It's easier if you order the spare part together with an adhesive tape.

    • Install the display assembly.

  8. Cette étape n’est pas traduite. Aidez à la traduire

    That's all. .
    • That's all.

    • .

    • .

    • .

    • .

    • .

    • .

    • Did you do it successfully?

Ligne d'arrivée

5 autre(s) ont terminé cette réparation.

ZFix

Membre depuis le 09/12/2013

177 811 Réputation

316 tutoriels rédigés

Équipe

Master Techs Membre de l'équipe Master Techs

Community

296 membres

980 tutoriels rédigés

Exactly what I needed! Step by step detailed instructions along with what tools I would need. Heating it up took longer than expected & it took me longer than 30 min, but I actually set aside 2 hours to replace my screen. Woohoo I finally I have a new screen & I did it all on my own...well with the amazing help from ZFix ;D

beatriz_ibre - Réponse

how to fix the display

Roneil Mcintosh - Réponse

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 8

Total : 9,229