Aller au contenu principal

Introduction

This guide will show you how to replace the battery on a Nokia Lumia 930 smartphone.

  1. Pull the sim card holder and the sim card out of the top of the phone using your fingernail.
    • Pull the sim card holder and the sim card out of the top of the phone using your fingernail.

  2. Place the tweezers in the sim card hole and upwards until the back panel pops out. Place the tweezers in the sim card hole and upwards until the back panel pops out.
    • Place the tweezers in the sim card hole and upwards until the back panel pops out.

  3. Wedge a plastic opening tool into the opening made in the previous step. Slide it along the edges to completely remove the back panel from the phone’s frame. Wedge a plastic opening tool into the opening made in the previous step. Slide it along the edges to completely remove the back panel from the phone’s frame.
    • Wedge a plastic opening tool into the opening made in the previous step. Slide it along the edges to completely remove the back panel from the phone’s frame.

  4. Remove the single 4mm Torx #4 screw that's securing the battery strap to the phone.
    • Remove the single 4mm Torx #4 screw that's securing the battery strap to the phone.

  5. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  6. Use the tweezers to remove the battery connector strap.
    • Use the tweezers to remove the battery connector strap.

  7. Remove the ten 4mm Torx #4 screws that secure the battery cover to the frame of the phone. Remove the ten 4mm Torx #4 screws that secure the battery cover to the frame of the phone.
    • Remove the ten 4mm Torx #4 screws that secure the battery cover to the frame of the phone.

  8. Use the flat end of the spudger to pry the battery cover apart from the phone frame. Use the flat end of the spudger to pry the battery cover apart from the phone frame. Use the flat end of the spudger to pry the battery cover apart from the phone frame.
    • Use the flat end of the spudger to pry the battery cover apart from the phone frame.

  9. Pull up on the heat spreader, being careful not to tear it.
    • Pull up on the heat spreader, being careful not to tear it.

  10. Use the flat end of the spudger to lift up the battery.
    • Use the flat end of the spudger to lift up the battery.

    • The batter is glued in place so pry carefully to not damage it.

    • Two flex cables are directly underneath the battery.

  11. Pull up to remove the battery from the phone.
    • Pull up to remove the battery from the phone.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Brianna Rivera

Membre depuis le 21/02/2018

351 Réputation

2 tutoriels rédigés

Équipe

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 8

7 derniers jours : 32

30 derniers jours : 153

Total : 2,476