Introduction
This guide shows how to replace the Nook HD+ volume and power button housings in 4 easy to understand steps. The tools needed to replace this piece of the Nook HD+ are the plastic opening tool, a T5 screwdriver, and tweezers.
No hazards are present in this guide, but be mindful of how rough the motherboard and ribbons are treated.
Ce dont vous avez besoin
-
-
Open the plastic frame by wedging the plastic iFixit opening tool under the plastic frame to remove adhesive.
-
Pop up all plastic tabs that secure the frame to the chassis.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Équipe
IUPUI, Team 3-3, Harley Spring 2022 Membre de l'équipe IUPUI, Team 3-3, Harley Spring 2022
IUPUI-HARLEY-S22S3G3
3 membres
3 tutoriels rédigés
