Introduction

This guide will help you replace the handset in your Nortel Networks i2004 IP telephone. You may need to replace your handset if the microphone or speaker in the handset is not working.

  1. Turn the phone over to view the underside, where the handset cord connects. Disconnect the handset cord from the back of the telephone by squeezing the clip and pulling straight out.
    • Turn the phone over to view the underside, where the handset cord connects.

    • Disconnect the handset cord from the back of the telephone by squeezing the clip and pulling straight out.

  2. %Livraison gratuite pour toute commande supérieure à 100 $US ou contenant un Pro Tech Toolkit !

    Parcourez notre boutique
  3. Disconnect the telephone cord from the handset by squeezing the clip and pulling straight out. Disconnect the telephone cord from the handset by squeezing the clip and pulling straight out.
    • Disconnect the telephone cord from the handset by squeezing the clip and pulling straight out.

  4. Connect the new handset by squeezing the clip attached to the phone cord and sliding the cord into the bottom slot of the phone.
    • Connect the new handset by squeezing the clip attached to the phone cord and sliding the cord into the bottom slot of the phone.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Morgan Zandonella

Membre depuis le 22/01/2012

49 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 10-35, Amido Winter 2012 Membre de l'équipe Cal Poly, Team 10-35, Amido Winter 2012

CPSU-AMIDO-W12S10G35

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 6

Total : 1,142