Réparez vos affaires Communauté Boutique

Nostalgia Electrics PCM805 Power Switch Replacement

Introduction

Use this guide to replace the switch if the device will not turn on when receiving power.

Ce dont vous avez besoin

  1. Nostalgia Electrics PCM805 Power Switch Replacement, Unscrewing the base: étape 1, image 1 de 2 Nostalgia Electrics PCM805 Power Switch Replacement, Unscrewing the base: étape 1, image 2 de 2

    • Unplug the device before following this guide.

    • First, place the device on its side, making sure the switch is not facing down.

    • Remove the eight 12mm Phillips #02 screws from the base.

    Modifier

  2. Nostalgia Electrics PCM805 Power Switch Replacement: étape 2, image 1 de 1

    • Gently separate the panel from the device.

    • Be sure not to tug at the wires that are still connected.

    Modifier

  3. Nostalgia Electrics PCM805 Power Switch Replacement, Power Switch: étape 3, image 1 de 1

    • Locate the switch/wire assembly inside the device.

    Modifier

  5. Nostalgia Electrics PCM805 Power Switch Replacement: étape 4, image 1 de 1

    • Pull back the insulation sleeves to expose the connector heads.

    Modifier

  6. Nostalgia Electrics PCM805 Power Switch Replacement: étape 5, image 1 de 2 Nostalgia Electrics PCM805 Power Switch Replacement: étape 5, image 2 de 2

    • Note the color of each wire and the order you remove them.

    • Using a pair of pliers, firmly grip the base of the wire.

    • Be sure to grip where the connector meets the wire and not where the connector covers the switch prong.

    • Pull the wire straight out of the switch.

    • Repeat this step for each wire.

    Modifier

  7. Nostalgia Electrics PCM805 Power Switch Replacement: étape 6, image 1 de 2 Nostalgia Electrics PCM805 Power Switch Replacement: étape 6, image 2 de 2

    • Using pliers, pinch tabs at the top and bottom of switch.

    • While pinching the tabs, push the switch until the tabs are on the outside of the device.

    Modifier

  8. Nostalgia Electrics PCM805 Power Switch Replacement: étape 7, image 1 de 2 Nostalgia Electrics PCM805 Power Switch Replacement: étape 7, image 2 de 2

    • Remove the switch from the device.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 4 autres contributeurs

Carlton

Membre depuis le 01/13/15

672 Réputation

5 tutoriels rédigés

Badges: 13

+ 10 badges supplémentaires

Équipe

USF Tampa, Team 3-5, Hickman Winter 2015 Membre de l'équipe USF Tampa, Team 3-5, Hickman Winter 2015

USFT-HICKMAN-W15S3G5

5 membres

8 tutoriels rédigés

Un commentaire

The red light turns on but the disk isnt spinning or heating up and when the out let has power

Manuela Velez - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 7

Total : 1,939