Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.
Introduction
This guide will teach the user how to install a new motor for the device.
Ce dont vous avez besoin
-
-
-
Gently remove the heating component from the popper.
-
Unscrew the four screws (11mm Philips #2 screws) that connect the white top to the housing.
-
-
-
Unscrew the three 10 mm Philips #2 screws that hold the heating component together.
-
-
-
Unscrew the two screws (2.5mm #0 Philips screws) that connect the motor to the fan base using the #0 Philips screwdriver.
-
Remove the motor from the fan base.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.