Introduction
This is a replacement guide that teaches you how to replce power cable for Nostalgia GCM-200.
Ce dont vous avez besoin
-
-
Remove the two 1.3 mm Phillips #2 screws.
-
Remove the S6 spanner screw.
-
-
-
-
Remove (flexible) plastic sleeves from the inside end of the power cable.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.