Aller au contenu principal

Numark TT1600 Belt Drive Replacement

  1. Numark TT1600 Belt Drive Replacement, Belt Drive: étape 1, image 1 de 1
    • Remove slip mat from top of the platter.

  2. Numark TT1600 Belt Drive Replacement: étape 2, image 1 de 1
    • Remove platter by inserting thumbs in holes and slowly pulling up.

    • There will be some initial resistance.

  3. Numark TT1600 Belt Drive Replacement: étape 3, image 1 de 1
    • Remove damaged belt which will be located below the platter.

  4. Numark TT1600 Belt Drive Replacement: étape 4, image 1 de 1
    • Install new belt by securing it around the inner ring, located on the back of the platter.

  5. Numark TT1600 Belt Drive Replacement: étape 5, image 1 de 1
    • Place a thumb in each hole.

    • You should be able to feel the rubber belt.

    • Gently pull the belt with each thumb, keeping the belt taut around the inner ring.

  6. Numark TT1600 Belt Drive Replacement: étape 6, image 1 de 2 Numark TT1600 Belt Drive Replacement: étape 6, image 2 de 2
    • Secure platter back on turntable while keeping belt taut.

    • Pull belt around motor spindle.

    • Gently let go of belt.

  7. Numark TT1600 Belt Drive Replacement: étape 7, image 1 de 1
    • Test turntable by spinning the platter.

    • There should be slight tension causing the platter to come to a stop.

Ligne d'arrivée

2 autres ont terminé cette réparation.

Nikolai

Membre depuis le 10/12/11

254 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 17-14, Regan Fall 2011 Membre de l'équipe Cal Poly, Team 17-14, Regan Fall 2011

CPSU-REGAN-F11S17G14

4 membres

11 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 3

7 derniers jours : 6

30 derniers jours : 42

Total : 6,251