Aller au contenu principal

Introduction

Users will be able to replace the cooling pipe of their blender using this guide.

Pièces

Aucune pièce spécifiée.

  1. Nutri Ninja BL450 Cooling Pipe Replacement, Small Rubber Wheel: étape 1, image 1 de 1
    • Remove the cup from the blender base.

  2. Nutri Ninja BL450 Cooling Pipe Replacement: étape 2, image 1 de 2 Nutri Ninja BL450 Cooling Pipe Replacement: étape 2, image 2 de 2
    • Turn the blender over and unscrew the three 14 mm screws holding the slotted base in place. These are Torx Security bits (TR9) on some units.

  3. Nutri Ninja BL450 Cooling Pipe Replacement: étape 3, image 1 de 3 Nutri Ninja BL450 Cooling Pipe Replacement: étape 3, image 2 de 3 Nutri Ninja BL450 Cooling Pipe Replacement: étape 3, image 3 de 3
    • Using a the standard Phillips head screwdriver bit, remove the slotted black plastic covering and then unscrew the one 11mm screw holding the power cord in place.

    • Unscrew the four 14 mm screws that are in the deep slots. This will release the motor from the base.

  4. Nutri Ninja BL450 Cooling Pipe Replacement: étape 4, image 1 de 3 Nutri Ninja BL450 Cooling Pipe Replacement: étape 4, image 2 de 3 Nutri Ninja BL450 Cooling Pipe Replacement: étape 4, image 3 de 3
    • CAUTION: the silver blade attached to the motor is very sharp. Use a towel or thick cloth to protect your hands for the next step.

    • Using a towel, hold the silver fan still. Twist the small black rubber wheel that is attached to the top of the blender base to the right. This will remove the wheel for replacement.

  5. Nutri Ninja BL450 Cooling Pipe Replacement, Cooling Pipe: étape 5, image 1 de 3 Nutri Ninja BL450 Cooling Pipe Replacement, Cooling Pipe: étape 5, image 2 de 3 Nutri Ninja BL450 Cooling Pipe Replacement, Cooling Pipe: étape 5, image 3 de 3
    • Remove the cooling pipe from the top inside of the blender base and replace it.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Morgan Blauth

Membre depuis le 24/02/2016

747 Réputation

5 tutoriels rédigés

Équipe

USF Tampa, Team 1-5, Leahy Spring 2016 Membre de l'équipe USF Tampa, Team 1-5, Leahy Spring 2016

USFT-LEAHY-S16S1G5

2 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 3

30 derniers jours : 15

Total : 1,928