Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

Power cords can be damaged over time due to various causes. This guide will demonstrate how to replace the power cord.

  1. Unscrew the screws from the base of the blender (These should be 5 gauge phillips head screws). 2 of the screws will be star shaped rather than phillips head.
    • Unscrew the screws from the base of the blender (These should be 5 gauge phillips head screws).

    • 2 of the screws will be star shaped rather than phillips head.

    • Remove the base plate.

  2. Identify the red and black wires topped with white-clear caps. Use pliers to squeeze the flattened part of both caps.
    • Identify the red and black wires topped with white-clear caps.

    • Use pliers to squeeze the flattened part of both caps.

    • The black and red wires attached to the power cord should be loose and ready to pull out.

  3. Replace the cord by slipping the new cord's black and red wires into the caps.
    • Replace the cord by slipping the new cord's black and red wires into the caps.

    • Pinch the middle of the cap back to the flattened position using the pliers.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Allie Decker

Membre depuis le 26/09/2017

125 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team S7-G1, Banghart Fall 2017 Membre de l'équipe Cal Poly, Team S7-G1, Banghart Fall 2017

CPSU-BANGHART-F17S7G1

5 membres

6 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 3

7 derniers jours : 13

30 derniers jours : 68

Total : 1,233