Introduction
This Air Fryer came in for service during our Repair Café. I found a bad safety switch and replaced it with a new one from eBay.
-
-
-
There are 2 screws inside the cooking chamber.
Demander à FixBot
-
-
-
The top will pop off at these clips, use a tool or your fingers to gently pull.
-
-
-
-
Remove the screws to remove the circuit board.
-
-
-
The safety switch is what was bad on this one. I replaced it with one from eBay.
-
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
2 commentaires de tutoriel
In the last video u showed how the top was and the switch u was going to change, how did u get the top lid off, took the 4 screws out but still didn’t pop off
