Réparez vos affaires Communauté Boutique

Nvidia Shield Tablet K1 WIFI Antenna Replacement

Ce dont vous avez besoin

  1. Nvidia Shield Tablet K1 WIFI Antenna Replacement, Back Panel: étape 1, image 1 de 1

    • Starting at the Micro SD Card Slot and using the blue plastic opening tool, begin to maneuver the tool around the edges while applying light pressure to lift the panel upwards.

    Modifier

  2. Nvidia Shield Tablet K1 WIFI Antenna Replacement: étape 2, image 1 de 2 Nvidia Shield Tablet K1 WIFI Antenna Replacement: étape 2, image 2 de 2

    • There are clips holding the back panel to the rest of the case. You must apply some force to lift the back panel off.

    • Continue lifting up the panel all the way around the edges of the tablet.

    • Once all of the panel clips are unfastened, gently remove the back panel.

    Modifier

  4. Nvidia Shield Tablet K1 WIFI Antenna Replacement, WIFI Antenna: étape 3, image 1 de 1

    • Use the angled tweezers to disconnect the black power cable from the mother board. The Cable should pop up from its slot when pulled.

    • Make sure you disconnect the right cables. There are three of these.

    Modifier

    You do not need to disconnect the antenna power cable. You only need to disconnect the other 2 black power cables. Just pull the antenna out together with the Mboard.

    Dave Bogan - Réponse

    Did you not remove the battery and disoldered its cables? Why are they still in place?

    Nikos Tsarmpopoulos - Réponse

  5. Nvidia Shield Tablet K1 WIFI Antenna Replacement: étape 4, image 1 de 1

    • Remove the screw adjacent to the WIFI Antenna using the J000 Philips head screw-driver.

    • Screw description: short black screw 20 mm length and 30 mm diameter.

    Modifier

  6. Nvidia Shield Tablet K1 WIFI Antenna Replacement: étape 5, image 1 de 1

    • Using the angled tweezers, begin removing the antenna from the device.

    Modifier

    You only need to free the antenna from the case. Leave it hanging from the Mboard.

    Dave Bogan - Réponse

  7. Nvidia Shield Tablet K1 WIFI Antenna Replacement: étape 6, image 1 de 2 Nvidia Shield Tablet K1 WIFI Antenna Replacement: étape 6, image 2 de 2

    • The black plastic piece of the antenna is attached to a copper colored film which can be pulled up using the tweezers.

    • The antenna should now be free from the device.

    Modifier

    what replacement part can i use?

    just - Réponse

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Auteur

avec 2 autres contributeurs

James Upchurch

Membre depuis le 02/09/16

658 Réputation

3 tutoriels rédigés

Badges: 15

+ 12 badges supplémentaires

Équipe

USF Tampa, Team 7-7, Cagle Spring 2016 Membre de l'équipe USF Tampa, Team 7-7, Cagle Spring 2016

USFT-CAGLE-S16S7G7

3 membres

9 tutoriels rédigés

Un commentaire

Odd question for you. I'm replacing the antena in a nvidia shield as an experimant, as was wonder if you know what type of connecter is used on the cable to the pcb. I dont want to desoder the exsisting antenna if i can help it as they are calabrated.

Justin Mosimann - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 20

Total : 4,800