Introduction
How to replace the two antenna on the OLPC XO-4 Touch.
Ce dont vous avez besoin
-
-
Remove the two 4mm Phillips #1 screws underneath the screen on the right-hand side.
-
Rotate the screen 180° and remove the other two screws.
-
-
-
-
Gently unplug the two connectors by pulling them away from the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.