Réparez vos affaires Communauté Boutique

OLPC XO-4 Touch Wireless Card Replacement

Introduction

Learn how to install a wireless card into the OLPC XO-4 Touch.

Ce dont vous avez besoin

  1. OLPC XO-4 Touch Wireless Card Replacement, Battery: étape 1, image 1 de 1

    • Turn the laptop upside-down, with the handle facing away from you.

    Modifier

  2. OLPC XO-4 Touch Wireless Card Replacement: étape 2, image 1 de 2 OLPC XO-4 Touch Wireless Card Replacement: étape 2, image 2 de 2

    • Pull the lock tabs towards the green outer edges of the laptop.

    • Hold the left lock tab in the unlock position until the battery is completely removed in the next step.

    Modifier

  3. OLPC XO-4 Touch Wireless Card Replacement: étape 3, image 1 de 2 OLPC XO-4 Touch Wireless Card Replacement: étape 3, image 2 de 2

    • Lift up on the middle of the battery to remove it from the device.

    Modifier

  4. OLPC XO-4 Touch Wireless Card Replacement, Screen Frame: étape 4, image 1 de 3 OLPC XO-4 Touch Wireless Card Replacement, Screen Frame: étape 4, image 2 de 3 OLPC XO-4 Touch Wireless Card Replacement, Screen Frame: étape 4, image 3 de 3

    • Remove the two 4mm Phillips #1 screws underneath the screen on the right-hand side.

    • Rotate the screen 180° and remove the other two screws.

    • You will have to put your screwdriver through the handle in order to reach the middle screw for both sides.

    Modifier

  5. OLPC XO-4 Touch Wireless Card Replacement: étape 5, image 1 de 3 OLPC XO-4 Touch Wireless Card Replacement: étape 5, image 2 de 3 OLPC XO-4 Touch Wireless Card Replacement: étape 5, image 3 de 3

    • Remove the green side panel by pressing down on the small green button on the top and sliding the panel up.

    • Repeat the step above for the panel on the other side.

    Modifier

  6. OLPC XO-4 Touch Wireless Card Replacement: étape 6, image 1 de 1

    • Be careful not to pull the bottom too far out because a ribbon cable is under the frame and can easily break.

    • Gently lift up the lower part of the frame and pull it down to free the screen frame.

    Modifier

  8. OLPC XO-4 Touch Wireless Card Replacement: étape 7, image 1 de 2 OLPC XO-4 Touch Wireless Card Replacement: étape 7, image 2 de 2

    • Lift the black connector and pull the ribbon cable out by the purple tab, freeing the frame.

    Modifier

  9. OLPC XO-4 Touch Wireless Card Replacement, Screen: étape 8, image 1 de 1

    • Remove the four 7.62mm screws using a Phillips #1 screwdriver.

    Modifier

  10. OLPC XO-4 Touch Wireless Card Replacement: étape 9, image 1 de 2 OLPC XO-4 Touch Wireless Card Replacement: étape 9, image 2 de 2

    • Be careful not to pull the screen out too far. There are two ribbon cables attached to the screen, and they can easily break.

    • Carefully lift the screen out.

    Modifier

  11. OLPC XO-4 Touch Wireless Card Replacement: étape 10, image 1 de 3 OLPC XO-4 Touch Wireless Card Replacement: étape 10, image 2 de 3 OLPC XO-4 Touch Wireless Card Replacement: étape 10, image 3 de 3

    • Notice that the laptop in this picture has been turned 180° with the antennas now below the screen.

    • For each ribbon cable, lift up the black connector and gently pull the ribbon cables out by the plastic tabs.

    Modifier

  12. OLPC XO-4 Touch Wireless Card Replacement: étape 11, image 1 de 1

    • Remove the screen from the laptop.

    Modifier

  13. OLPC XO-4 Touch Wireless Card Replacement, Back Cover: étape 12, image 1 de 1

    • Remove the four 6mm screws using a Phillips #1 screwdriver.

    Modifier

  14. OLPC XO-4 Touch Wireless Card Replacement: étape 13, image 1 de 2 OLPC XO-4 Touch Wireless Card Replacement: étape 13, image 2 de 2

    • Rotate the top half of the laptop so that the back cover is facing you.

    • Pull up the tabs on the lower part of the back cover and pull it down and away from the antennas.

    • Remove the back cover by gently lifting it off of the laptop.

    Modifier

  15. OLPC XO-4 Touch Wireless Card Replacement, Wireless Card: étape 14, image 1 de 3 OLPC XO-4 Touch Wireless Card Replacement, Wireless Card: étape 14, image 2 de 3 OLPC XO-4 Touch Wireless Card Replacement, Wireless Card: étape 14, image 3 de 3

    • When pulling out the connectors, make sure to hold the metal connector instead of the wire.

    • Gently pull out the two antenna connectors by pulling them away from the motherboard.

    Modifier

  16. OLPC XO-4 Touch Wireless Card Replacement: étape 15, image 1 de 1

    • Remove the black 4mm Phillips #1 screw holding the wireless card in.

    Modifier

  17. OLPC XO-4 Touch Wireless Card Replacement: étape 16, image 1 de 2 OLPC XO-4 Touch Wireless Card Replacement: étape 16, image 2 de 2

    • Remove the wireless card from the laptop by gently sliding it out of its socket.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 3 autres contributeurs

Zach Yasuda

Membre depuis le 01/24/13

173 Réputation

2 tutoriels rédigés

Badges: 10

+ 7 badges supplémentaires

Équipe

Cal Poly, Team 3-29, Amido Winter 2013 Membre de l'équipe Cal Poly, Team 3-29, Amido Winter 2013

CPSU-AMIDO-W13S3G29

4 membres

20 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 1

7 derniers jours : 1

30 derniers jours : 1

Total : 391