Réparez vos affaires Communauté Boutique

Oculus Rift CV1 Facial Interface Replacement

Introduction

This is the foam component of the headset that touches the user's face. The interface also includes the frame with the attached lycra. You will need the iFixit opening tool and a T3 screwdriver for this replacement.

Ce dont vous avez besoin

  1. Oculus Rift CV1 Facial Interface Replacement, Facial Interface: étape 1, image 1 de 1

    • Pull firmly from the top of the headset facial interface to remove the foam frame.

    Modifier

  2. Oculus Rift CV1 Facial Interface Replacement: étape 2, image 1 de 1

    • Remove the six T3 4mm screws from the top and bottom edges of the case.

    Modifier

  4. Oculus Rift CV1 Facial Interface Replacement: étape 3, image 1 de 1

    • Insert the spudger underneath the edge of the lens on the left or right side.

    • Slide the spudger upwards and around the edge of the frame to undo the tabs underneath.

    • Repeat for the other side of the frame.

    Modifier

  5. Oculus Rift CV1 Facial Interface Replacement: étape 4, image 1 de 3 Oculus Rift CV1 Facial Interface Replacement: étape 4, image 2 de 3 Oculus Rift CV1 Facial Interface Replacement: étape 4, image 3 de 3

    • Lift up the frame to see a tab hidden underneath the lycra mesh along the edge of the lens.

    • Pull up on the tab with the spudger.

    • Repeat for the corresponding tab on the other lens.

    Modifier

  6. Oculus Rift CV1 Facial Interface Replacement: étape 5, image 1 de 1

    • Lift up on the plastic frame around the lens.

    • Slide a finger around the inside edge, pulling outward from the center of the lens to release the other tabs.

    • Repeat for the frame on the other lens.

    Modifier

  7. Oculus Rift CV1 Facial Interface Replacement: étape 6, image 1 de 1

    • Pull up along the outer frame.

    • Remove the facial interface.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Auteur

avec 3 autres contributeurs

Kyle Anderson

Membre depuis le 01/24/19

226 Réputation

1 tutoriel rédigé

Badges: 7

+ 4 badges supplémentaires

Équipe

Cal Poly, Team S18-G4, White Winter 2019 Membre de l'équipe Cal Poly, Team S18-G4, White Winter 2019

CPSU-WHITE-W19S18G4

3 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 2

7 derniers jours : 11

30 derniers jours : 40

Total : 4,633