Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

This guide will teach you how to disassemble the control box of the Oculus Rift DK1.

Pièces

Aucune pièce spécifiée.

  1. Use a plastic opening tool to carefully pry off the four rubber feet from the control box. You have now revealed the four 9 mm Phillips #1 screws underneath the rubber feet. You have now revealed the four 9 mm Phillips #1 screws underneath the rubber feet.
    • Use a plastic opening tool to carefully pry off the four rubber feet from the control box.

    • You have now revealed the four 9 mm Phillips #1 screws underneath the rubber feet.

  2. Use a Phillips #1 Screwdriver to unscrew the four 9mm Phillips screws on the bottom of the control box. You can now remove the bottom lid of the control box. It should come apart easily. You can now remove the bottom lid of the control box. It should come apart easily.
    • Use a Phillips #1 Screwdriver to unscrew the four 9mm Phillips screws on the bottom of the control box.

    • You can now remove the bottom lid of the control box. It should come apart easily.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Audrey Chan

Membre depuis le 12/01/2015

201 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 70-5, Forte Winter 2015 Membre de l'équipe Cal Poly, Team 70-5, Forte Winter 2015

CPSU-FORTE-W15S70G5

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 351