Réparez vos affaires Communauté Boutique

Olympus D590 Motherboard Replacement

Introduction

Step-by-step Instruction Guide

Olympus D590 Logic Board Replacement

Ce dont vous avez besoin

  1. Olympus D590 Motherboard Replacement, Face Plate: étape 1, image 1 de 1

    • Remove five baseplate screws using a Phillips #00 screwdriver.

    Modifier

  2. Olympus D590 Motherboard Replacement: étape 2, image 1 de 1

    • Press and slide the battery cover retainer clip to the left. Use tweezers to lift the battery cover away.

    Modifier

  3. Olympus D590 Motherboard Replacement: étape 3, image 1 de 1

    • Remove the single screw from the battery housing using a Phillips #00 screwdriver.

    Modifier

  4. Olympus D590 Motherboard Replacement: étape 4, image 1 de 1

    • Using tweezers, lift the rubber plate to expose the ports.

    Modifier

  6. Olympus D590 Motherboard Replacement: étape 5, image 1 de 1

    • Remove two screws from the ports using a Phillips #00 screwdriver.

    Modifier

  7. Olympus D590 Motherboard Replacement: étape 6, image 1 de 1

    • Use a spudger to pry the faceplate away from the rest of the camera.

    Modifier

  8. Olympus D590 Motherboard Replacement: étape 7, image 1 de 1

    • To avoid disconnection of the connector line to the motherboard, use caution when pulling faceplate away from camera case.

    • Damage to the connector line will prevent the on/off power switch's operational function.

    Modifier

  9. Olympus D590 Motherboard Replacement, Motherboard: étape 8, image 1 de 1

    • Remove four screws holding the motherboard to the internal housing component using a Phillips #1 screwdriver.

    Modifier

  10. Olympus D590 Motherboard Replacement: étape 9, image 1 de 1

    • Be cautious of the wires attached to the motherboard.

    • Remove the motherboard from the internal housing component.

    • Do not completely lift the motherboard out with the wiring connected. The wires must be disconnected before proceeding. The next step will demonstrate disconnection process.

    Modifier

  11. Olympus D590 Motherboard Replacement: étape 10, image 1 de 3 Olympus D590 Motherboard Replacement: étape 10, image 2 de 3 Olympus D590 Motherboard Replacement: étape 10, image 3 de 3

    • Use rounded tweezers to disconnect the three wiring strips from the motherboard.

    • Using sharp tweezers may tear wiring tape and wires.

    • Use gentle force when wiggling or pulling wiring tape and wires to disconnect from the motherboard.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Auteur

avec 7 autres contributeurs

Sara

Membre depuis le 04/15/10

84 Réputation

2 tutoriels rédigés

Badges: 6

+ 3 badges supplémentaires

Équipe

Cal Poly, Team 28-23, Regan Spring 2010 Membre de l'équipe Cal Poly, Team 28-23, Regan Spring 2010

CPSU-REGAN-S10S28G23

4 membres

14 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 1,767