Introduction
This guide will help you to replace the flash device on your Olympus Stylus 1010.
Ce dont vous avez besoin
-
-
Remove the five Phillips #00 bottom and right side panel screws.
-
-
-
Using a plastic spudger, lift up the black clips.
-
Still using the spudger, detach the three gold wire tape connectors from the inside of the camera.
-
-
-
Unscrew the two remaining screws on the metal piece using a #00 screwdriver.
-
Now lift the metal piece straight up in order to remove it.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.