Aller au contenu principal

Olympus Stylus Tough TG-2 iHS Connector Port Casing Replacement

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Ce dont vous avez besoin

  1. Olympus Stylus Tough TG-2 iHS Connector Port Casing Replacement, Connector Port Casing: étape 1, image 1 de 1
    • Locate the side of the camera with the connector cover.

    • Remove the 2 Phillips #00 4.6mm casing screws.

  2. Olympus Stylus Tough TG-2 iHS Connector Port Casing Replacement: étape 2, image 1 de 2 Olympus Stylus Tough TG-2 iHS Connector Port Casing Replacement: étape 2, image 2 de 2
    • Open the connector cover by sliding the tab labeled lock to revile orange.

    • Slide the connector cover lock to revile orange and the door will spring open.

    • Remove the single internal Phillips #00 3.77mm screw.

  3. Olympus Stylus Tough TG-2 iHS Connector Port Casing Replacement: étape 3, image 1 de 3 Olympus Stylus Tough TG-2 iHS Connector Port Casing Replacement: étape 3, image 2 de 3 Olympus Stylus Tough TG-2 iHS Connector Port Casing Replacement: étape 3, image 3 de 3
    • Close the door to gain access to the casing.

    • Use your fingers to remove the black plastic casing that surrounds the connector door.

    • Use your fingers to remove the next black plastic piece .

    • Remove the two screws revealed

Conclusion

To reassemble your device, follow these instructions in reverse order.

Amanda

Membre depuis le 07/20/15

933 Réputation

8 tutoriels rédigés

Équipe

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 70