Aller au contenu principal

Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.

Ce dont vous avez besoin

  1. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 1, image 1 de 1
    • Flip the device over so the front of the speaker is facing down. Make sure to place the speaker on a flat surface

  2. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 2, image 1 de 2 : étape 2, image 2 de 2
    • Use a T6 Torx screwdriver to remove the four 9mm screws from the back of the device.

  3. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 3, image 1 de 2 : étape 3, image 2 de 2
    • Use a magnet to remove the screws after unscrewing them and place them aside.

  4. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 4, image 1 de 1
    • Carefully remove the back cover without breaking the battery wire.

  5. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 5, image 1 de 2 : étape 5, image 2 de 2
    • Remove the end of the battery connection from the motherboard by holding the end of the wire and carefully pulling it out of the socket using tweezers.

    • The battery is still attached to the back cover.

  6. Cette étape n’est pas traduite. Aidez à la traduire

    : étape 6, image 1 de 3 : étape 6, image 2 de 3 : étape 6, image 3 de 3
    • Use the metal spudger to carefully pry along the entire side of the battery from its connecting tape on the back cover.

Ligne d'arrivée

3 autres ont terminé cette réparation.

Carlos Pernia

Membre depuis le 02/10/16

170 Réputation

1 tutoriel rédigé

Équipe

USF Tampa, Team 2-2, Sullivan Spring 2016 Membre de l'équipe USF Tampa, Team 2-2, Sullivan Spring 2016

USFT-SULLIVAN-S16S2G2

3 membres

2 tutoriels rédigés

Un commentaire

What battery is required for this though? Is it easily found on amazon?

Mohsin - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 3

7 derniers jours : 13

30 derniers jours : 17

Total : 1,343