Aller au contenu principal

OnHub Congestion-sensing Antenna Replacement

Ce dont vous avez besoin

  1. OnHub Congestion-sensing Antenna Replacement, Speaker Grille: étape 1, image 1 de 2 OnHub Congestion-sensing Antenna Replacement, Speaker Grille: étape 1, image 2 de 2
    • Make sure the device is unplugged before proceeding with the disassembly.

    • While holding the base firmly using the palm of one hand, remove the cowl (cover) by turning the cowl counterclockwise until a snap is heard. Once disengaged, pull upwards.

  2. OnHub Congestion-sensing Antenna Replacement: étape 2, image 1 de 1
    • Place the plastic opening tool under the speaker grille, and just above the light ring.

    • Move the plastic opening tool around the groove while applying upward force to pry loose the 4 clips holding the grille in place.

  3. OnHub Congestion-sensing Antenna Replacement: étape 3, image 1 de 2 OnHub Congestion-sensing Antenna Replacement: étape 3, image 2 de 2
    • Using a metal spudger, carefully remove the congestion-sensor antenna by undoing the two clips.

    • There is a delicate wire connection to the antenna that is easily broken if not careful.

  4. OnHub Congestion-sensing Antenna Replacement, Congestion-sensing Antenna: étape 4, image 1 de 2 OnHub Congestion-sensing Antenna Replacement, Congestion-sensing Antenna: étape 4, image 2 de 2
    • Remove the wire connection to the antenna by soldering it off.

    • For help with soldering and de-soldering check out the iFixit Soldering Guide

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autres ont terminé cette réparation.

Joseph Ainsworth

Membre depuis le 02/10/16

544 Réputation

3 tutoriels rédigés

Équipe

USF Tampa, Team 3-3, Sullivan Spring 2016 Membre de l'équipe USF Tampa, Team 3-3, Sullivan Spring 2016

USFT-SULLIVAN-S16S3G3

3 membres

10 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 335