Réparez vos affaires Communauté Boutique

OnePlus Nord N200 Sub Board Replacement

Ce dont vous avez besoin

  1. OnePlus Nord N200 Sub Board Replacement, Sub/Charger Board: étape 1, image 1 de 3 OnePlus Nord N200 Sub Board Replacement, Sub/Charger Board: étape 1, image 2 de 3 OnePlus Nord N200 Sub Board Replacement, Sub/Charger Board: étape 1, image 3 de 3

    • Take sim tray out prior to beginning repair.

    • Heat back of phone to make the adhesion more pliable

    • Insert a slim prying tool to begin removing the back cover, move in a counterclockwise direction

    • Add IPA as you work to detatch the adhesion layer

    • When approaching the volume button, be cautious, as the ribbon cable is exposed and can easilyt be cut

    • Remove back cover

    Modifier

  2. OnePlus Nord N200 Sub Board Replacement: étape 2, image 1 de 3 OnePlus Nord N200 Sub Board Replacement: étape 2, image 2 de 3 OnePlus Nord N200 Sub Board Replacement: étape 2, image 3 de 3

    • Using a J000 screwdriver, remove the Screws holding the edge casing to the screen (19 Total)

    • Using a pry tool, seperate the edge plastic from the screen

    • Once you have attained suitable lift, disconnect the power button cable.

    • Remove the edge plastic and set aside.

    Modifier

  4. OnePlus Nord N200 Sub Board Replacement: étape 3, image 1 de 1

    • Remove the plastic speaker piece

    • Disconnect the antenna cables and main board connector

    • Remove the board and insert new component

    • reconnect connectors

    Modifier

  5. OnePlus Nord N200 Sub Board Replacement: étape 4, image 1 de 3 OnePlus Nord N200 Sub Board Replacement: étape 4, image 2 de 3 OnePlus Nord N200 Sub Board Replacement: étape 4, image 3 de 3

    • Reconnect the antenna and main board

    • Reconnect the power cable, and reattach the plastic edge

    • Using J000, screw the 19 screws back in

    Modifier

  6. OnePlus Nord N200 Sub Board Replacement: étape 5, image 1 de 2 OnePlus Nord N200 Sub Board Replacement: étape 5, image 2 de 2

    • Reconnect the back plastic, and set on heat to adhere

    • You can also use tesa tape to increase the adhesion.

    Modifier
Conclusion

This order can be used for charger, headphone jack, or water damage to sub board.

Auteur

avec 1 autre contributeur

Jesse Smith

Membre depuis le 10/16/23

121 Réputation

1 tutoriel rédigé

Badges: 1

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 14

30 derniers jours : 76

Total : 411